Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
(To activate timer with the setting you’ve chosen, set to Activate.) ¦ Off Time Set the hour, minute and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.) ¦ Volume Set the desired volume level. ¦ Source > TV / USB You can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.). N When there is only one photo file in the USB, the Slide Show will not play. ¦ Channel (when Source is set to TV) Select the desired channel. Clock :--:-- . SleepTimer :OffTimer1 :InactivatedTimer2 :InactivatedTimer3:InactivatedU MoveE EnterR ReturnTimePlug&PlayLanguage :EnglishTime . GameMode :OffBDWise :OffChildLock :OnChangePINLightEffect :InStandbyMelody :MediumEnergySaving :OffSetup OnTime L MoveU AdjustE EnterR ReturnTimer1OffTimeVolume0000Inactivate10SourceChannelTV0RepeatOnceSunMonTueWedThuFriSat0000Inactivate English - 0 ¦ Contents (when Source is set to USB) You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically. N If the folder name is too long, the folder can not be selected. ¦ Repeat Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. N When Manual is selected, press the > button to select the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear. N You can set the hour, minute and channel by pressing the number buttons on the remote control. N Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time. INPUT / SUPPORT ¦ Input Menu . Source List Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. O Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button, number buttons. O You can also watch HDMI mode simply by pressing the HDMI button on the remote control. ¦ TV / AV / Component / PC / HDMI /DVI / HDMI / HDMI / HDMI / USB N You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are notconnected will be sorted to the bottom. N If USB devices are connected to the USB (HDD) jacks, they are displayed as USB in order. N Using the Colour buttons on the remote with the Source list . Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not appear in the list. . TOOLS (Tools): Displays the Edit Name and Information menus. N PC always stays activated. . Edit Name ¦ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA Name the device connected to the input jacks to make your input source selection easier. N When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN (DVI) port, you should set the HDMI /DVI mode to DVI PC in the Edit Name of the Input mode. N When connecting an HDMI/DVI cable to the HDMI IN (DVI) port, you should set the HDMI /DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required. SourceList EditNameInputRefreshT ToolsSourceListTVPC :---- AV :---- Component :---- HDMI1/DVI:---- HDMI2 :---- English - ¦ Support Menu . Self Diagnosis ¦ Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. . Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call centre for assistance. . No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual. ¦ Sound Test If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu. N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressingthe MUTE button. . Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call centre for assistance. . No: If you can hear sound from the speakers, select No. There may be a problem with your...