Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
See the diagram below. yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the connection. See the diagram below. yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. .. You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) The Modem Port on the Wall TV Rear Panel Modem Cable External Modem (ADSL / VDSL / Cable TV) LAN Cable ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) TV Rear Panel LAN Cable The Modem Port on the Wall ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) ANT 2 IN (SATELLITE) ANT 1 IN (AIR / CABLE) The LAN Port on the Wall TV Rear Panel LAN Cable LAN Cable IP Sharer (having DHCP server) External Modem (ADSL / VDSL / Cable TV) Network Setup (Auto) Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Connect your TV to your LAN as described in the previous section. 2. Turn on your TV, press the MENU button on your remote, use the ^ or Ў button to select Setup, and then press the ENTERE button. 3. Use the ^ or Ў button to select Network in the Setup menu, and then press the ENTERE button. The Network screen appears. Network Network Type : Wired > Network Setup Network Test U Move E Enter R Return SWL(Samsung Wireless Link) : Off SWL connect 4. On the Network screen, select NetworkType. 5. Set NetworkType to Wired. 6. Select Network Setup. The Network Setup screen appears. Network Setup IP Address : Subnet Mask : Gateway : DNS : Auto DNS Server : U Move E Enter R Return Internet Protocol Setup : Auto > 7. Set Internet Protocol Setup to Auto. 8. Auto acquires and enters the needed Internet values automatically. When done, press the RETURN button on your remote. 10. Select NetworkTest to check the Internet connectivity. 11. If the Network Function has not acquired the network connection values, go to the directions for Manual. Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network ConnectionValues To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 6 in the “How to set up automatically” procedure. 2. Set Internet Protocol Setup to Manual. 3. Press the Ў button on your remote to go to the first entry field. 4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 5. When done, press the RETURN button on your remote. 6. Select NetworkTest to check the Internet connectivity. 04 Advanced Features English 29 30 English Advanced Features ¦¦ Connecting to a Wireless Network To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below. Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports...
Otros modelos de este manual:TV - UE32C6700US (37.02 mb)
TV - UE32C6710US (37.02 mb)
TV - UE32C6730US (37.02 mb)
TV - UE32C6740SS (37.02 mb)