Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to . . either -10dB or -20dB. English ¦ Speaker Settings . Speaker Select (External Speaker / TV Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. NWhen Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. NWhen Speaker Select is set to External Speaker. . . . TV Speaker: Off, External Speaker: On NWhen Speaker Select is set to TV Speaker. . TV Speaker: On, External Speaker: On NIf there is no video signal, both speakers will be mute. English . Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. N When you control the volume of the external devices (Set-topbox or DivX Player) connected to the TV, set to off the Auto Volume mode. Because you can’t feel the effect of the volume control by the Auto Volume mode. . ¦ Reset Sound (Yes / No) . Reset all sound settings to the factory defaults. English . Selecting the Sound Mode t When you set to Dual f-g, the current sound mode is displayed on the screen. Audio Type Dual 1 / 2 Dual 1 / 2 A2 Stereo Mono MONO Automatic changeStereo STEREO - MONO Dual DUAL f - DUAL g DUAL f Mono MONO Automatic change NICAM Stereo Stereo MONO - STEREO Dual MONO - DUAL f ^DUAL g < DUAL f . . If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. N Only activated in stereo sound signal. N Only available when the Source is set to TV. English Preference . Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: . You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below. .. The Modem Port on the Wall TV Rear Panel LAN CableModem Cable External Modem (ADSL / VDSL / Cable TV) English . You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. The Modem Port on the Wall TV Rear Panel LAN Cable LAN CableModem Cable External Modem (ADSL / VDSL / Cable TV) IP Sharer (having DHCP server) . . English . Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. .. The LAN Port on the Wall TV Rear Panel LAN Cable English . If you have a Dynamic Network, you should use an ADSL m...
Otros modelos de este manual:TV - UE27D5000NW (5.69 mb)
TV - UE32D5500RP (5.69 mb)
TV - UE32D5500RW (5.69 mb)
TV - UE32D5520RK (5.69 mb)