Votos - 5, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
The channel menu is greyed out. (unavailable) • The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU > System > Plug & Play (Initial setup) > ENTERE. . . English Issues Solutions and Explanations You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect. The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source. . . English Issues Solutions and Explanations The message “Scramble signal” or “Weak Signal/No Signal” appears. • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. You turned the TV off 45 minutes ago, and it turned on again. • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. There are recurrent picture/ sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. . . English . Connecting to a COMMON INTERFACE slot ¦ Attaching the CI Card Adaptor Attach the adapter as shown below. To connect the CI CARD Adapter, follow these steps. N We recommend attaching the adapter before installing TV Rear 1. Insert the CI CARD Adapter into the two holes on the product 1. .. NPlease find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port. English 2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2. 3. Insert the “CI or CI+ CARD” We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting. Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert the card before attaching. .. English ¦ Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. . If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. . The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID an...
Otros modelos de este manual:TV - UE27D5000NW (5.69 mb)
TV - UE32D5500RP (5.69 mb)
TV - UE32D5500RW (5.69 mb)
TV - UE32D5520RK (5.69 mb)