Votos - 3, Puntuación media: 3 ( )

Fabricar: Toshiba Tamaño del archivo: 7.45 mb Nombre del archivo: Idioma del manual:

When in video mode and no signal is input, this selection is set to 0. (Settings are stored in memory.) Note: Some settings cannot be adjusted in any of the following cases. • AutoView is selected. • TheaterLock is set to On. To adjust the picture quality: 1 > Settings > PICTURE > the setting you would like to adjust (Backlight, Contrast, Brightness, Color, Tint, or Sharpness). 2 Press C or c to adjust the setting. Press . Note: • Any picture settings that you adjust affect the current input only. You can adjust the picture quality separately for each input. • Depending on a Sharpness value, the Edge Enhancer effect may be reduced. To reset to the factory defaults: 1 Select the picture mode you want to reset. OK 2 > Settings > PICTURE > Reset > . A confirmation screen appears. OK 3 Press C or c to select Yes. Press . Chapter 7: Picture and sound controls Chapter 7: Picture and sound controls Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView. Edge Enhancer The Edge Enhancer feature lets you adjust the levels for your desired picture settings and achieve a sharper picture. To set Edge Enhancer: 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Edge Enhancer. Press OK . 3 Press C or c to select On. 4 Press B or b to highlight Level. Press C or c to select either 1, 2, 3, 4, or 5. Press . Note: • When the Picture Mode is set to AutoView, the level range is from -2 to +2. • If the Picture Mode is set to Game or PC, Edge Enhancer is not available. • This feature may not work properly depending on the content. • Noise may appear on the image depending on the device connected to the TV (e.g. a device with a specific enhancer function). Dynamic Contrast Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Dynamic Contrast. 3 Press C or c to adjust the level. The adjustment range is from 0 to 10. Press . Note: When the Picture Mode is set to AutoView, the level range is from -5 to +5. DynaLight™ The DynaLight™ feature automatically strengthens the black coloring of dark areas in the video according to the level of darkness. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select DynaLight. 3 Press C or c to select On or Off. Press . Static Gamma The static gamma feature lets you adjust the levels of black in the picture. To adjust the static gamma settings: 1 Y > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Static Gamma. 3 Press C or c to adjust the level. The adjustment range is within ±15 from center. Press . Film Stabilization This feature helps to eliminate video shaking. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Film Stabilization. 3 Press C or c to select Smooth, Standard, or Off. Press . Note: If the Picture Mode is set to Game, this feature will be set to Off automatically and grayed out. Chapter 7: Picture and sound controls Chapter 7: Picture and sound controls ClearFrame™ The ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select ClearFrame. 3 Press C or c to select On. Press . Note: If the Picture Mode is set to Game, this feature is not available. MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to highlight MPEG NR. 4 Press C or c to select either Low, Middle, High, or Off. Press . Note: If the Picture Mode is set to Game or PC, this feature is not available. DNR DNR lets you soften the screen representation of a weak signal to reduce the noise effect. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to select DNR. 4 Press C or c to select Low, Middle, High, Auto, or Off. Press . Note: • If the Picture Mode is set to Game or PC, this feature is not available. • The differences may not always be noticeable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. Auto Brightness Sensor When the Auto Brightness function of Auto Brightness Sensor Settings is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Auto Brightness Sensor Settings. Press OK . 3 Press B or b to select Auto Brightness Sensor. 4 Press C or c to selec...

Descargar ahora

Introduzca dos números de la imagen: