Votos - 3, Puntuación media: 3.3 ( )

Fabricar: Toshiba Tamaño del archivo: 7.27 mb Nombre del archivo: Idioma del manual:

2 Press B or b to select Film Stabilization. 3 Press C or c to select Smooth, Standard or Off. Press O. OK Note: • If the Picture Mode is set to Game or PC, this feature will be set to Off automatically and grayed out. • If the Picture Mode is set to AutoView, select Auto, Smooth, Standard or Off. ClearFrame 120™ feature The ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness. 1 Y > PICTURE > Advanced Picture Settings > . 2 Press B or b to select ClearFrame 120. 3 Press C or c to select On. Press O. OK Note: If the Picture Mode is set to Game, this feature is not available. Chapter 7: Picture and sound controls Chapter 7: Picture and sound controls MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. 1 Y > PICTURE > Advanced Picture Settings > . 2 Press B or b to select Noise Reduction. Press OK OK . 3 Press B or b to highlight MPEG NR. 4 Press C or c to select either Low, Middle, High or Off. Press OK . Note: If the Picture Mode is set to Game or PC, this feature is not available. DNR DNR lets you soften the screen representation of a weak signal to reduce the noise effect. 1 Y > PICTURE > Advanced Picture Settings > . 2 Press B or b to select Noise Reduction. Press OK OK . 3 Press B or b to select DNR. 4 Press C or c to select Low, Middle, High, Auto or Off. Press OK . Note: • If the Picture Mode is set to Game or PC, this feature is not available. • The differences may not always be noticeable. For the best result, use lower settings, as picture quality can be lost if the setting is too high. Smart Sensor When the Auto Brightness function of Smart Sensor is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. 1 Y > PICTURE > Advanced Picture Settings > . 2 Press B or b to select Smart Sensor Settings. Press . 3 Press B or b to select Auto Brightness Setting. 4 Press C or c to select On or Off. Press OK OK OK . Note: When the Picture Mode is set to AutoView, this feature is automatically set to On and will be not available. Backlight Adjustment Pro This feature adjusts the backlight so that it can change to match the ambient light conditions. 1 Y > PICTURE > Advanced Picture Settings > . 2 Press B or b to select Smart Sensor Settings. Press . 3 Press B or b to select Backlight Adjustment Pro. Press OK OK OK . The Backlight Control Level screen appears. 4 Press OK to display the adjustment window. Press C or c to select the point. Press B or b to adjust the level. The adjustment range is from 0 to 100. Backlight Adjustment Pro 100 0 Backlight Control Level Control Level Ambient Light 37 Cancel Reset 5 Press OK to fix the adjustment. To cancel the adjustment when selecting a point, select Cancel on the screen. To reset the adjustments of all points to the factory defaults, select Reset on the s...

Descargar ahora

Introduzca dos números de la imagen: