Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Clean the cabinet with a soft cloth. • Note that material deterioration or screen coating degradation may occur if the unit is exposed to a volatile solvent, such as alcohol, thinner, benzine or insecticide, or if prolonged contact is maintained with rubber or vinyl materials. • The ventilation holes can accumulate dust over a period of time. To ensure proper ventilation, we recommend removing the dust periodically (once a month) using a vacuum cleaner. GB (continued) 9 Precautions On the PDP (Plasma Display Panel) On image • Please note that the PDP screen is made with high-precision technology. However, black points or bright points of light (red, blue, or green) may appear constantly on the PDP screen, and irregular coloured stripes or brightness may appear on the PDP screen. This is not a malfunction. • With extensive use of this TV set in 4:3 mode, the 4:3 screen area might become darker within a 16:9 panel. To avoid this problem, the “Smart” picture mode should be used (see page 26). On image retention • If the following images are displayed for an extended period time, image retention (afterimage) in areas of the screen may result due to the characteristics of the Plasma Display Panel. – Black bars at the top and bottom that appear with a wide video source (Letterbox picture). – Black bars to the left and right that appear with a 4:3 video source (conventional TV broadcasts). – Video game sources – DVD on-screen menu displays – On-screen menus, channel numbers, etc., of connected equipment such as Set top box, Cable modem, VCR, etc. The risk of this is higher if the set is in “Live” mode or has a high contrast setting. This image cannot be removed once burnt onto the screen. To avoid the risk of image retention do not leave the TV set operating on such a picture, or programme for a long time, use the “Screen Saver” function (page 28) or lower the contrast setting. Repeated extended daily usage of the same image, or programme can also result in this occurrence. IMAGE RETENTION IS NOT COVERED BY THE SONY WARRANTY. • To reduce image retention, this TV set has the “Screen Saver” function. The default setting of the “Orbit” function in “Screen Saver” is “On” (page 28). • The “Screen Saver” function prevents and reduces image retention. For more details, see page 28. On altitude When used at an altitude of greater than 1900m or 6248 feet (air pressure less than 800hPa), this Plasma Display Panel may generate a low buzzing sound as a result of the difference between the interior and exterior air pressure of the panels. This is not considered a defect and is not covered under by the Sony Warranty. This buzzing sound is an inherent characteristic of any Plasma Display Panel. Precautions Overview Checking the Accessories Supplied Remote Control Size AA Batteries Coaxial Cable (1): RM-Y1002 (1): (R6 Type) (2): Do not remove ferrite cores. Mains Lead (Type C-6) (1): GB Cleaning Cloth (1) Clamp screws (2) Plug Holder (1) 11 Overview Overview of the TV Buttons and Indicators To open the drop-down panel of your TV, push up the panel door just under the mark until you hear a click, then the panel door will open. TV Front Panel PROG PROG (Channel) +/– buttons 2 (Volume) +/– buttons (Input Select) button Remote control sensor (Sleep) indicator (Picture Off) indicator (Power) switch and (Power/Standby) indicator Status of the indicators (Power/Standby) indicator lights up in green The power of the TV is on. (Power/Standby) indicator lights up in red The TV is in the standby mode. (Power/Standby) indicator flashes in red The TV is receiving remote control signals. (Power/Standby) indicator flashes in red repeatedly There is a problem with the TV. For more details, refer to “Self-diagnosis function” on page 47. (Sleep) indicator lights up in red The Sleep Timer function is on when the TV is turned on. For more details, refer to “Sleep Timer Function” on page 33. (Picture Off) indicator lights up in blue The picture is switched off. Only the picture is switched off (the sound remains unchanged). Press again to cancel. For more details, refer to “Picture Off Function” on page 33. For the connectors on the rear panel of the TV, refer to “Connecting Optional Equipment” on page 38. Overview Overview of the Remote Control Buttons a Switching the TV to the standby mode: Press this button to temporarily turn off the TV and switch it to the standby mode (the (Power/Standby) indicator on the TV lights up in red). Press it again to switch on the TV from the standby mode. To save energy, we recommend switching the TV off completely when the TV is not in use. If no signal is received or no operation is performed in the TV mode for 10 minutes, the TV automatically switches to the standby mode. b Switching the VCR or DVD on/off: Press this button to switch your VCR or DVD on or off. c Selecting the VCR, TV or DVD (Media Selector): With this remote control you can operate not only this TV but also the main functions of your VCR or DVD...