Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.28 mb Nombre del archivo: Idioma del manual:

3. Connect the USB hard drive directly to the TV, or if you intend to connect other USB devices in future, connect the USB hard drive through a USB hub. Note: While you are formatting the USB hard drive, do not connect other USB devices to the TV. 4. Switch on the TV and the USB hard drive, if it has an external power source. 5. Switch to a digital TV channel. 6. Press to start formatting. 7. Follow the onscreen instructions to complete the formatting process. Warning: The formatting process may take some time. Do not switch off the TV or disconnect the USB hard drive until this process is complete. Pause a live TV broadcast 1. On a digital channel, press to pause a TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing. C. Where the live programme is currently broadcast. . To watch the stored broadcast, press or to search backward or forward. . To change playback speed, press or repeatedly. . To watch the live TV broadcast, press . Note: You cannot pause the TV broadcast when a recording is in progress. The stored broadcast on the USB hard drive is deleted if you do any of the following: . Disconnect the USB hard drive. . Start recording a TV programme. . Access Smart TV . Switch the TV to standby. . Switch to another channel. . Switch source to watch from a connected device - a Blu-ray disc player, digital receiver or USB storage device. Record TV shows What you can do If your TV is connected to the Internet, you can record TV programmes onto a USB hard drive. You can either record current TV programmes or a future TV programme. Start and manage the recordings from the electronic programme guide on the TV. See Use your TV > View programme guide > From the Internet (Page 16). Note: . Recording is only supported in countries with Internet programme guides and when your TV is connected to the Internet. . In Nordic countries, the TV provides limited support for subtitles while recording TV programmes. What you need To record TV programmes, do the following: . Tune your TV to receive digital TV channels (DVB broadcast or similar). See Set up your TV > Channel Settings > Automatic installation (Page 37). . Make sure that your TV is connected to the Internet through a high-speed broadband connection. See Connect your TV > Network and the Internet (Page 55). . Connect a USB 2.0 compatible hard disk drive (HDD) with a minimum capacity of 250 GB and a minimum transfer speed of 30 megabytes per second. Note: You can use the same HDD to record and Pause TV shows. To check if the programme guide supports recording: Press and select [Programme guide]. If you find the [TV Recording] button on the programme guide page, you can set up and manage recordings. If you can't see the [TV Recording] button, make sure that the programme guide data is set to be updated through the network. Select > [Setup] > [TV settings] > [Preferences] > [Programme guide] > [From network]. Install USB hard drive To record TV shows, you must connect...

Descargar ahora

Introduzca dos números de la imagen: