Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Sony Tamaño del archivo: 5.96 mb Nombre del archivo: Idioma del manual:

Fotos y especificaciones  Sony  KDL-32U4000

This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider. For further information about supported cable providers, refer to support web site: 3 Press G/g/f to select “Start”. The TV starts searching for channels. Do not press any buttons on the TV or remote. ~ Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”. ~ Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. Start- 7 GB Safety information Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation s The TV set should be installed near an easily accessible mains socket. s Place the TV set on a stable, level surface. s Only qualified service personnel should carry out wall installations. s For safety reasons, it is strongly recommended that you use Sony accessories, including: - KDL-37S40xx/ KDL-32S40xx/ KDL-37U40xx/ KDL-32U40xx/ KDL-37V40xx/ KDL-37V42xx/ KDL-32V40xx/ KDL-32V42xx: Wall-Mount Bracket SU-WL500 - KDL-26S40xx/ KDL-26U40xx/ KDL-26V40xx/ KDL-26V42xx: Wall-Mount Bracket SU-WL100 -KDL-37S40xx/ KDL-32S40xx/ KDL-37U40xx/ KDL-32U40xx/ KDL-37V40xx/ KDL-37V42xx/ KDL-32V40xx/ KDL-32V42xx: TV stand SU-FL300M s Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8 mm - 12 mm Screw (supplied with the Wall-mount bracket) Mounting Hook Hook attachment on rear of TV set Transporting s Before transporting the TV set, disconnect all cables. s Two or three people are needed to transport a large TV set. s When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel. s When lifting or moving the TV set, hold it firmly from the bottom. s When transporting the TV set, do not subject it to jolts or excessive vibration. s When transporting the TV set Be sure to hold the bottom of for repair or when moving, the panel, not the front part. pack it using the original Do not handle with dent carton and packing material. area. Do not handle with the transparent bottom part. Ventilation s Never cover the ventilation holes or insert anything in the cabinet. s Leave space around the TV set as shown below. s It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation. Installed on the wall 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. Installed with stand 30 cm 10 cm 10 cm 6 cm Leave at least this space around the set. s To ensure proper ventilation and prevent the collection of dirt or dust: – Do not lay the TV set flat, install upside down, backwards, or sideways. – Do not place the TV set on a shelf, rug, bed or in a closet. – Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. – Do not install the TV set as shown below. Air circulation is blocked. Wall Wall Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only mains leads supplied by Sony, not other suppliers. – Insert the plug fully into the mains socket. – Operate the TV set on a 220–240 V AC supply only. – When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. – Disconnect the mains lead from the mains socket before working on or moving the TV set. – Keep the mains lead away from heat sources. – Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. 8 GB Notes s Do not use the supplied mains lead on any other equipment. s Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken. s Do not modify the mains lead. s Do not put anything heavy on the mains lead. s Do not pull on the mains lead itself when disconnecting the mains lead. s Do not connect too many appliances to the same mains socket. s Do not use a poor fitting mains socket. Prohibited Usage Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location: O...

Descargar ahora

Introduzca dos números de la imagen: