Votos - 5, Puntuación media: 4 ( )

Fabricar: Sony Tamaño del archivo: 2.52 mb Nombre del archivo: Idioma del manual:

– when you switch off the TV using the ENERGY SAVING SWITCH (only certain models), power consumption will be almost zero. Design and specifications are subject to change without notice. 15 GB Additional Information Installing the Accessories (Wall-Mount/Wall-Hanging Bracket) Installing the Accessories (Wall-Mount/Wall-Hanging Bracket) For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the SU-WL500 (KDL-55NX813, KDL-46/40NX713 only)/SUWL700 Wall-Mount Bracket or SU-WH500 Wall-Hanging Bracket (sold separately). • Refer to the Instructions supplied with the Wall-Mount Bracket or Wall-Hanging Bracket to properly carry out the installation. • Refer to “Detaching the Table-Top Stand from the TV” (in this manual). Be sure to remove the joint when the Table-Top Stand is not attached to the TV. (KDL55NX813, KDL-46/40NX713 only) Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. SU-WL500 (KDL-55NX813, KDL-46/40NX713 only) Mounting Hook Screw (+PSW6 . 16) Soft cloth ~ • Attach the Mounting Hook using four +PSW6 . 16 screws supplied with the Wall-Mount Bracket. 16 GB TV installation dimensions table (SU-WL500) TV installation dimensions table (SU-WL500) Screen centre point Unit: cm Model Name KDL- Display dimensions Screen centre dimension Length for each mounting angle Angle (0°) Angle (20°) A B C D E F G H 55NX813 127.6 77.0 8.6 48.2 9.2 31.8 72.3 49.5 46NX713 108.3 66.0 14.1 48.2 9.1 28.0 62.0 49.5 40NX713 94.4 58.2 17.8 48.2 9.1 25.2 54.7 49.5 Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 14) for its weight. Screw and Hook locations diagram/table (SU-WL500) Model Name KDL-Screw location Hook location 55NX813 e, j b46NX713 40NX713 Screw location Hook location When installing the Mounting Hook on the TV. When installing the TV onto the Base Bracket. a* b c* * Hook location “a” and “c” cannot be used for the models. (Continued) 17 GB Additional Information SU-WL700 ~ • Remove the bottom cover and terminal cover when installing on a wall (KDL-52/40NX803 only). • Be sure to use the black spacers supplied with the TV when installing on a wall (KDL-52/40NX803 only). Precautions Be sure to install the Wall-Mount Bracket securely to the wall following the instructions in this as well as the manual provided with the Wall-Mount Bracket. The numbers given in the parentheses indicate the installation steps described in the instruction manual provided with Wall-Mount Bracket. 1 Check the parts supplied with the Wall- Mount Bracket (1). Refer to the instruction manual provided with the Wall-Mount Bracket. 2 Decide on the installation location. (2-1) Refer to the following “TV installation dimensions table”. Allow for suitable clearance between the TV, the ceiling and protruding parts of the wall as instructed. 3 Install the Base Bracket on the wall. (2-2 through 3) Decide the positions of the screw on the wall and install the Base Bracket. Refer to the instruction manual provided with the Wall-Mount Bracket for details. 4 Detach the Table-Top Stand from the TV, if necessary. (4-1) • See “Detaching the Table-Top Stand from the TV” (in this manual) for details. 5 Connect the supplied AC power cord (mains lead). (5-1) (KDL-52/ 40NX803, KDL-40/46NX703 only) ~ • Do not attach the bottom cover. 6 Place the spacers (KDL-52/40NX803 only). 1 Remove the four screws, and be sure to store them in a safe place, keeping them away from children. 2Place the four spacers (supplied). ~ • When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the original holes on the rear of the TV. 7 Attach the Mounting Bracket and the Lock Bracket. (4-3 through 4-7) Refer to the instruction manual provided with the Wall-Mount Bracket. 8 Prepare the paper template. (5-2) 1. Refer to the following “TV installation dimensions table” and mark the TV outline on the template. 2. Tape the template to the wall as instructed in the manual provided with the Wall-Mount Bracket. Follow the instruction manual provided with the Wall-Mount Bracket to complete the installation. (5-3 through 6) 18 GB TV installation dimensions table (SU-WL700) Screen centre point TV installation dimensions tabl...

Descargar ahora

Introduzca dos números de la imagen: