Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
• You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling (800) 553-7278. Cloth speaker grills: • Lightly brush with a soft cloth brush, or lint brush. • If necessary, you can vacuum using the brush and hose attachments of your vacuum cleaner. Do not use the beater brush section on the grill cloth. General Cleaning Warnings: • DO NOT allow liquid to enter the TV through the ventilation slots or any crevice. • DO NOT use any strong or abrasive cleaners as these can scratch the surfaces. • DO NOT use any cleaners with ammonia, bleach, alcohol, benzine, or thinners as these can dull the surfaces. • DO NOT spray liquids or cleaners directly on the TV’s surfaces. • DO NOT scrub or rub the TV harshly. Wipe it gently. IMPORTANT DO NOT use any kind of abrasive cleaner on the surface of the TV screen or Diamond Shield™. Service If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or a Mitsubishi Authorized Warranty Service Center. • DO NOT adjust any controls other than those described in this Owner’s Guide. • DO NOT remove the protective back cover of your TV. Menus not described and shown in this owner’s guide are designed for Factory use and for Authorized Service Personnel. Damage caused to the TV by non- authorized changes or changes to these menus made by non-authorized persons are not covered under warranty. This TV is very heavy! Exercise extreme care when moving TV as foreign material may become embedded in the castor wheels which could damage wood or other delicate flooring. Appendix G: Diamond Shield™ Removal for WS-55815 Diamond Shield Installation for WS-65815 Molding Clip Removal for WS-55815 and WS-65815 1. Remove the left and right side molding clips by inserting a plastic card, like a credit card between the molding clip and Diamond Shield, at the top, middle and bottom. After loosening the clip with the card, pull on a corner of the clip closest to the Diamond Shield. Do not use force, the clips should slide out of place. Both the right and left side clips must be removed. For the WS-55815, go to steps 2-4, for the WS-65815, go to steps 5-7. Step 2 or 6. Diamond Shield removal or installation Diamond Shield installation: 5. Carefully remove the Diamond Shield from the protective packaging. Wipe off any dust with a lint-free cloth. Do not use any cleaners on the anti-glare Diamond Shield. 6. Insert the shield by sliding it into the bottom channel. Gently bow the Diamond Shield toward you and insert the top of the Diamond Shield into the top channel. 7. Re-install the molding clips for a finished look, by pushing them back into place, starting at a corner. Do not use force. This completes the Diamond Shield installation. To remove the Diamond Shield, follow steps 1 and 2-4. Step 1. Diamond Shield molding clip removal Diamond Shield Removal: 2. To remove the Diamond Shield, slide it out of the channels, starting with the top. Gently bow the Diamond Shield towards you and push the top out of the channel, then lift straight up to remove it from the bottom channel. 3. Wipe off any dust with a lint-free cloth and store the shield carefully where it will not be scratched. Do not use any cleaners on the anti-glare Diamond Shield. This completes the Diamond Shield removal. 4. Re-install the molding clips for a finished look, by pushing them back into place, starting at a corner. Do not use force. To install the Diamond Shield, follow steps 1 and 5-7. WARNING Sharp edges! Always wear gloves to handle, lift, remove and install the Diamond Shield and molding clips. For additional assistance, call (800) 332-2119. Appendix H: Cabinet Separation for Model WS-65815 FrontGlossyPanelSpeakerGrillePlasticCover(Screw) Connector(LF-ZF) LowerBracket(Screw) FrontBoard(Screw) 32158764Cabinet-TopBracketInterlockTabsLowerRearSurfaceCabinet-TopCabinet-Top(Applyforcehere) Ifneeded. Cabinet-Bottom2"Approximately. 1.RemoveSpeakerGrillebypullingforwardfromleftandrightsidesofTV. 2.RemoveFrontGlossyPanelscrewsatlowerbrackets. 3.SlideFrontGlossyPaneltorightsideapproximately1/2",thenpullawayfromTV. 4.RemovethescrewsattachingCabinet-TopandCabinet-Bottomfromthefrontboards. 5.Disconnecttheconnector(LF-ZF). 6.RemovethedecorativePlasticCoveroneachsideofthecabinet.RemovetheexposedScrewoneachside. 7.SecuretheCabinet-Bottomfrommoving,thenslideforwardtheCabinet-Top(mayrequiresomeaddedforce). CarefullylifttheCabinet-TopstraightupuntiltheinterlockTabsareclearfromCabinet-Bottom. 8.CarefullyplacelowerrearsurfaceofCabinet-Toponfloor. 9.OnceyouhavemovedandpositionedtheCabinet-Bottomtoitsdesiredlocation, reversetheprocedureandmounttheCabinet-TopontheCabinet-Bottom.BesuretoaligntheBracketsproperly.KEEPFINGERSCLEAROFALLJOINTS!ReplacetheScrewsanddecorativePlasticCoversthatwereremovedinstep6.Rejointheconnectorsperstep5.Replacethescrewsperstep4. ReinstalltheGlossyPanelandScrewsperstep2. ReinstalltheSpeakerGrilleperstep1. Thefollowingoperationsshouldbeperformedbytwopeople: TheMitsubishiTVmodelWS-65815p...
Otros modelos de este manual:TV - WS-55815 (3.92 mb)
TV - WS-55815 (3.92 mb)
TV - WS-65815 (3.92 mb)
TV - WS-65815 (3.92 mb)