Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. TO OUR CUSTOMERS Thank you for choosing a TEC electronic cash register MA-205 series. This instruction manual provides a description of the functions and handling of this register and should be read carefully to obtain maximum performance. Since every consideration has been given to safety, there is no danger of damaging the machine by incorrect operation. Please refer to this manual whenever you machine. This machine has been manufactured should give you full satisfaction. However, transit, or there are any unclear points in local TEC representative. [] The specifications described in this manual may be modified by TEC, if necessary. [] Be sure to keep this manual for future reference. PRECAUTIONS 1. The keys on the keyboard work with a light touch. Avoid pressing the keys too hard. 2. Avoid handling the machine with wet hands. 3. Do not apply thinner or other volatile oils to the cabinet or other plastic parts. If dirty, wipe off with a piece of cloth soaked in neutral detergent and squeezed tightly. have any doubts concerning the under strict quality control and if the machine is damaged during this manual, please contact your APPEARANCE AND NOMENCLATURE Paper Cover Journal Window Receipt Outlet Mode Lock Cash Drawer Rear/Remote Display Front Display Keyboard Drawer Release Lock - 1 - ^ MODE LOCK AND MODE SELECTOR KEYS MODE LOCK (POSITION) (FUNCTION) REG v SET -y SET SET Key REG Key _Jl_ OFF REG MA Key In this position, the register will allow programming operat ions. No keys on the keyboard are accepted. Nothing is indicated in the display. Normal cash register operations are carried out in this mode. When the Mode Lock is changed from another position to this position, the current time is autoamtically displayed. The time display disappears on operating any key on the keyboard, power from OFF to ON, or Mode Lock position changes. The sale totals can be read and the programmed data can be verified in this position. All the resettable totals and their counters will be read and reset in this position. MODE SELECTOR KEYS REG Key: MA Key: SET Key: The REG Key is used by the cashier who operates the register. This key can access the positions of OFF and REG. The MA Key is used by the store manager who will daily supervise the collection of money and printout of transactions recorded by the register. This key can access the positions of OFF, REG, X, and Z. The SET Key is used by the programmer, access the positions of OFF and SET. This key can The keys may be inserted or pulled out at the "OFF" or "REG" position. -2- DISPLAY The Operator's Display (front display) is located at the top of the register just above the keyboard. The Customer's Display may be used as Rear Display if it is kept in the receptacle or used as Remote Display if it is stretched up and turned to the required direction. The display has two types of indications -- numeric display and message descriptors. The angle of adjustable. the Operator's Display in the up-and-down direction is DPT RPT ALM-, (-) —<£ REG -1 AMOUNT E iE 34 5El ,-ST NUMERIC DISPLAY AMOUNT (7 digits): Displays the numeric data, such as amount, quantity, time, etc. RPT (1 digit): Displays the repeat count of the same item. The count is indicated from the second entry on, and only the first digit will be displayed even if the count exceeds nine. DPT (1 digit): Displays the code which represents each Department Key. It stays lit when repeating the same department entry. MESSAGE DESCRIPTORS (Arrow Marks) ALM: Lights up to indicate that the last operation or numeric entry has resulted in an error. To clear the error condition, depress the [C] key. (~) : Lights up when the [RTN MDSE] , [ITEM CORR] , or [%-] key has been operated. It also light up when the [ST], [TXBL TL] or one of the media total keys has been depressed and the displayed amount is negative. REG: Lights up when a sale item has been entered. ST: Lights up when the subtotal amount is displayed after the [ST] key has been depressed. And it also lights up when the [TXBL TL] key has been operated. CG: When an amount tendering operation has been performed, this lamp lights up with the change due displayed. TL: Lights up on a finalizing operation with the total amount displayed when finalized without any amount tendered. -3- TIME DISPLAY When the Mode Lock is turned to the "REG” position from any other position, the current time is automatically displayed in the AMOUNT portion. The displ...
Otros modelos de este manual:Equipo de Taller - MA-205-10 Series (740.35 kb)