Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
BOLT.......................................................................................................................................... 4 2. 3/8 X 4-1/2 IN. THREADED SHAFT............................................................................................................ I" 3. 3/8 IN. WASHER........................................................................................................................................... 2 4. 1/2 IN. WASHER........................................................................................................................................... 2 5. - 1/2 IN. LOCK NUT...................................................................................................................................... 4 6. 3/8 IN. LOCK NUT.......................................................................................................................................3 7. 3/8 IN. NUT................................................................................................................................................... I 8. KEYHOLE CLEVIS.....................................................................................................................................; 1 9. SWIVEL......................................................................................................................................................... I 10. 2-3/8 IN. CABLE RETAINING CLIP............................................................................................................ 2 11. QUICK DISCONNECT LINK ....................................................................................................................... 1 12. 1/4 IN. CAP NUT.............................................................................................................................................1 13. 2 SQ. END CAP.............................................................................................................................................2 14. SHOCK CORD...............................................................................................................................................1 15. 2 IN. PULLEY................................................................................................................................................1 16. 3-1/2 X 1 IN. PULLEY...................................................................................................................................2 17. 3/8X2 IN. BOLT...........................................................................................................................................2 NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. j-BOLT LENGTH- BOLT LENGTH RULER: I 1/2 1 1/2 | 1/2 | i/2 | ¡/2 | № ] 0|I|2|3|4|5 6 I—!—!_!_!_I_I_!_!_!—!_L.....1 1 I I I I I I I I I 1 I . i l 12/21/95 NOTE: IP THE REAR SIIROUD IS ASSEMBLED TO THE PARABODY 425, IT WILL NEED TO BE REMOVED TO ASSEMBLE THE LEG PRESS AND THE ADAPTER KIT. PLEASE REMOVE TOE SHROUD AT THIS TIME BY REMOVING THE FOUR (4) 3/8 X 1 IN. BOLTS AND FOUR 3/8 IN. WASHERS. NOTE: THE LEG PRESS ATTACHMENT (832101) MUST BE ASSEMBLED BEFORE ASSEMBLING IT TO THE PARABODY 425. PLEASE ASSEMBLE THE LEG PRESS ATTACHMENT AT THIS TIME USING THE 832 PRODUCT ASSEMBLY INSTRUCTIONS. 1. Attach two (2) 2 SQ. IN. COVER CAPS onto the FRONT LEG WELDMENT as shown on drawing. 2. Remove two (2) 1/2 IN. LOCK NUTS and two (2) 1/2 IN. WASHERS FROM the PRESS BASE \ BASE connection of the 425. . 3. SECURELY assemble the BASE CONNECTION WELDMENT to the PRESS BASE and BASE connection of the 425 using the two (2) 1/2 IN. LOCK NUTS REMOVED IN STEP 2. 4. SECURELY attach the assembled S32 LEG PRESS ATTACHMENT to the FRONT LEG WELDMENT using two (2) 1/2 X 3 IN. BOLTS, two (2) 1/2 IN. WASHERS (FROM STEP 2) and two (2) 1/2 IN. LOCK NUTS. 5. SECURELY attach the 832 to the 425 by connecting the FRONT LEG WELDMENT to the BAS E CONNECTION WELDMENT, using two (2) 1/2 X 3 IN. BOLTS, two (2) 1/2 IN. WASHERS and two (2) 1/2 IN. LOCK NUTS. " 6. Remove one (1) 1/4 iN. CAP NUT from the rear L-hook of the TOP BOOM. (LEAVE 2 IN. PULLEY ON L-HOOK) 7. .’ Assemble one (1) 2 IN. PULLEY to the rear L-hook and secure place with one (1) 1/4 IN. CAP NUT. 8. CAREFULLY remove one (1) 3/8 IN. LOCK NUT and one (1) SWIVEL WITH MULTI-PRESS SHOCK CORD from the rear flat of the BASE. 9. Remove one 3/8 IN. NUT, one (1) 2-3/8 IN. CABLE RETAINING CLIP, one (1) 3-1/2 X 1 IN. PULLEY, one (1) 3V8 X 21/2 IN BOLT, and one (1) 3/8 IN. WASHER from the rear flat of the BASE. 10. Reassemble one (1) 3-1/2 x 1 IN. PULLEY, one (1) 2-3/8 IN. CABLE RETAINING CLIP, one 3/8 IN. WASHER, and one (1)3/8 IN. WIT, from Step 9 to the rear flat of the BASE using one (1) 3/8 x 4-1/2 IN. THREADED STUD, and one (1) 3/8 IN. NUT. 11. Reassemble one (1) SWIVEL WITH MULTI-PRESS SHOCK CORD to the 3/8 X 4-1/2 IN. THREADED STUD, using one (1) 3/8 IN. LOCK NUT. (PARTS ARE FR...