Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
Any time during a workout, a user can view the actual speed by lightly tapping either SPEED ^ or Ў key.The “pace” (minutes per mile) appears in the left-most display. A user can opt to change the speed, if they hold the key down for more than one second. During Setup mode, the SPEED ^ Ў keys are used for data selection. Pressing either Ў or ^ key does not affect the running belt. However the ^ or Ў keys do affect what appears on the display. Refer to Setup Mode and Promptson page 27. Stop button: The red Stop button is not part of the keypad, but it is an integral part of the display console. Anytime during a workout, a firm tap on the red Stop button slows the running belt to a stop. The treadmill retains a user’s workout statistics and enters Pause mode. The club has the ability to limit the amount of time a user can remain in pause mode. Refer to Club Informationon page 20. For a user to resume working out within the time frame allotted, he or she can press the SPEED ^ until the desired speed of the running belt is reached. page 33 COMMERCIAL PRODUCTS DIVISION CHANGING THE DISPLAY FEATURES USING THE SELECT KEY The SELECT keys lets a user choose which feature(s) appears on the display. When a user begins a course, the display automatically scans all highlighted features. The indicator light (LED) next to the SCAN label is lit. To turn off the scanning feature entirely, a user can switch the indicator lights, next to the item, on or off. If the indicator light is off, the item will not appear in the display. To turn the indicator lights on or off, take the following steps: 1. Press the SELECT key until the indicator next to the item’s label is lit. If a user turns an item “ON,” the indicator light next to the item remains lit and the featured information continually appears on the display.The SCAN LED turns off indicating that the display is no longer scanning all the features. 2. To reset to scan mode, press the SELECT key until the SCAN LED is lit. page 34 COMMERCIAL PRODUCTS DIVISION Exercising on the C932 Once the C932 is set up, it is ready to use. The easy-to-understand prompts let the user select a course and specify how long he or she wishes to work out.The speed and incline levels can be adapted to meet their fitness goals. Important: Club owners, managers, and personal trainers.Remind users how important it is to use the treadmill’s safety features and security clip while working out on the treadmill. Instruct them on how to attach the security clip to their clothing near their waistline. If any complications occur, a strong tug on the security cord or a quick tap on the STOP key will stop the running belt. Note: This section of the manual is written for the user because it specifically explains how to work out on the treadmill. References are made in second person. Information presented in this section includes: • Using the safety features • Quick steps to working out • Reviewing keypad and workout tips • Cooling down, pause and exiting features CAUTION: Do not allow children on or near the treadmill. If anything should get caught in the rollers, the running belt does not stop immediately. SAFETY FEATURES The C932 treadmill is a powerful machine. Safety aspects to consider include: • Always hold onto the handrail whenever you step on to or off of the treadmill. • Always attach the security clip to your clothing prior to working out. • Prior to the start of a course, the display will return to the PRECOR banner if more than two minutes elapse without a key press occurring. USING THE SECURITY CLIP A security clip is attached, by its cord, to the red Stop button that straddles the handrail.Always attach the security clip to your clothing before each workout. A tug on the cord trips the security switch and slows the running belt to a stop. If the security switch trips while you are working out, the treadmill retains your workout statistics and enters Pause mode.To resume your workout, reattach the security clip to your clothing, and press the SPEED ^ key until you reach the desired speed. USING THE HANDRAILS Always grasp the handrails to help keep your balance when stepping on to or off of the treadmill and when you press the display keys. CAUTION:When you press the QuickStart key, keep in mind that the running belt begins moving automatically at 1.0 mph or 1.5 kph following the scrolling prompt: BELT STARTING 3, 2, 1… Other courses, such as the Interval (INTV) course have user-defined speeds. Prior to a change in speed, a three-minute warning scrolls across the display. Always grasp a handrail when the running belt changes speeds. Do not let go until you are comfortable with the running belt speed. page 35 COMMERCIAL PRODUCTS DIVISION USING THE STOP BUTTON The red Stop button is not part of the keypad, but it is an integral part of the treadmill’s safety features. Anytime during a workout, a firm tap on the red STOP button or a tug on the security cord slows the running belt to a stop.The treadmill...