Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
3. In Admin Viewer, click the “Start Control” button to obtain control rights for the camera. 4. Move the camera angle to the position you want to set with the Telephoto, and Wide- angle values, then click the “Get Value” button for each. The values retrieved using the “Get Value” button can be checked in the View Restriction Value Input boxes, or with the View Restriction Preview frame. At this point, you can also enter and set values in the View Restriction Value Input boxes. 5. Click the “Apply” button. Check the Status List to be sure the values were sent correctly. Then when the “Save Settings” button is clicked, the values will be saved to the VB-C50FSi/ VB-C50Fi. 4-11 VB Administration Tools After the view restrictions have been set, please check to be sure that the view restrictions are correctly reflected in the Viewer. When checking from the Admin Note Viewer, choose “View Restriction” - “ON” from the “Privilege” menu bar (> P.4-64). . When you want to clear the view restriction settings, clear the “Apply the view restriction” check box, click the “Apply” button and then the “Save Settings” button. Tip . Even if the “Apply the view restriction” is selected, view restriction is not applied when an input box is left blank. In this case, the maximum value is applied. l The Preset Setting Tool enables you more visually and easily to set Presets and home position. Presets are set by operating the mouse. You can also enter settings for a Preset Tour with which you can tour and monitor two or more Presets within a specified start and end time. VB Administration Tools After setting presets, set the preset tour. Reflecting preset settings in the viewer 4-13 Executing a preset tour Preset Setting Tool Display Screen The display screen for the Preset Setting Tool is divided into the “Preset Settings Area” and the “Preset Tour Settings Area”. A maximum of 10 Presets and home positions can be set. In the “Preset Tour Settings Area”, you can enter settings for a Preset Tour with which you can tour and monitor two or more presets within a specified start and end time. Below is a description of the “Preset Setting Area” screen. See page 4-19 for information about the “Preset Tour Setting Area”. Preset Setting Area Display Screen qwertyuio!0!1!2!3!4Preset Tour Setting Area (> P.4-19) Preset Setting Area q “Load Settings” button Loads the Preset and Preset Tour settings currently set in the VB-C50FSi/VB-C50Fi. w “Save Settings” button Saves the set and applied Preset and Preset Tour settings made with this tool to the VBC50FSi/ VB-C50Fi. Be sure to save Preset and Preset Tour settings with the “Save Settings” button. e “Stop Communication” button This button can be clicked during communication with the VB-C50FSi/VB-C50Fi to abort the connection. r Panorama Preview A yellow Preset Preview frame is displayed in which the Preset settings are redisplayed. You can, by dragging the mouse, change the shape of the frame which will then be reflected in the Preset settings. t Preset Selection box Select the preset to set or “Home”. “Home” is the setting for home position. y “For picture recording only” When this is checked, presets are used for picture recording only; when it is not checked, presets can be used not only for picture recording but for the viewer as well. If you selected “Home” in the Preset Selection box, this setting will be grayed out (setting not possible). u Preset Name A name can be assigned to the preset. If you selected “Home” in the Preset Selection box, this setting will be grayed out (setting not possible). i Camera Selection box Another camera cannot be selected with the VB-C50FSi/VB-C50Fi. o Camera Parameters Enter the angle of view of the zoom you want to set in “Zoom”. • Camera Angles Zoom .......... Sets the zoom ratio (field of view angle). * Pan position and tilt position cannot be set with the VB-C50FSi/VB-C50Fi. • Brightness Sets the target value for the camera’s auto exposure feature. Select “Brighter” if the picture is too dark due to backlight or other factors. !0 “Get Value” button When the Get Value button is clicked, the current angle of the camera selected at the VBC50FSi/ VB-C50Fi is retrieved as camera parameters. !1 “Apply” button Settings for current Presets and Tour Schedules are applied to the VB-C50FSi/VB-C50Fi, and you can proceed to the next Preset setting. At this stage, the edited settings are not yet saved to the VB-C50FSi/VB-C50Fi. Be sure to click the Save Settings button to save the settings to the VB-C50FSi/VB-C50Fi. !2 “Preview” button The settings for camera parameters are reflected in the Preset Preview frame. The camera zoom position for the VB-C50FSi/VB-C50Fi also switches to this Preset and you can confirm from the Admin Viewer. !3 “Admin Viewer” button This button can be used to start up Admin Viewer. !4 Status List Displays the results of communication between this tool and the VB-C50FSi/VB-C50Fi. Warning messages are displayed in blue and error messages are di...
Otros modelos de este manual:Vídeo - VB-C50FSi (9.52 mb)