Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Star Trac E-STi |
Resumen del manual
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: These service instructions are for use by qualified service personnel only, to reduce the risk of electric shock, DO NOT perform any servicing other than that contained in the operating instructions unless you are qualified to do so. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S MANUAL This STAR TRAC Personal Viewing Screen has been engineered and manufactured to assure your safety. Before using this product, be sure to read your user’s manual in order to maximize the life of your display. DO NOT disassemble the PVS. Any Un-authorized maintenance will void the warrenty. Un-experienced technicians can cause serious damage, electric shock, and other hazards. Contact your dealer or an experienced technician for repair. DO NOT place sharp tools such as pin or metallic object near the display. May result in scratching the surface of the monitor as well as the frame. Keep your monitor away from liquid or a humid place. May cause electric shock and damage the display. DO NOT spray any fluid directly on the surface of the monitor. Spray the cleaner fluid on a soft cloth to wipe the surface of the monitor. When strange sound or smoke occurs, be sure to unplug your power cord. These problems can cause a serious electric shock and other hazards. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE STAR TRAC PERSONAL VIEWING SCREEN (PVS) UNPACK YOUR PERSONAL VIEWING SCREEN Inspect the shipping carton for any parts that may be missing BEFORE discarding the carton. Items can shift during transportation, and may be accidentally discarded with the carton. If any parts are missing, please contact Star Trac Product Support at 800-503-1221. Have the serial number of the PVS, and a list of the missing parts ready so they may be shipped to you. The Personal Viewing Screen is shipped in one box separate from your exercise equipment. The following items will be in the box. PVS kits are available in two different signal formats; NTSC/ATSC (typically US, Japan) and PAL/SECAM (typically Europe, Middle East), make sure the kit you have is appropriate for the country of the club facility. NTSC/ATSC Kit (US, Japan) NOTE: there are 4 different kits ie. E-TRi, E-TBTi/E-UBi, E-RBi, AND E-STi. • PVS assembly with Mounting Bracket, Cables, and Display Cap with Grommet (There are 5 cables in the neck) • Center Console Keypad Assembly • Entertainment Headphone Jack and Mount • (2) 5” Tie straps • (2)M8 x 20mm Buttonhead Screws • (1)M8 x 20mm Buttonhead screw (E-TRi only) • (1)M8 Nut (E-TRi only) • 60w Power Supply • Power Cord, AS/NZS 3112 (NOT INCLUDED IN THE E-TRi KIT) STAR TRAC PERSONAL VIEWING SCREEN OWNER’S MANUAL • Power Cord, Nema 6-15 (NOT INCLUDED IN THE E-TRi KIT) • Power Cord, Nema 5-15 (NOT INCLUDED IN THE E-TRi KIT) • Owners Manual PAL/SECAM Kit (Europe, Middle East) NOTE: there are 4 different kits ie. E-TRi, E-TBTi/E-UBi, E-RBi, AND E-STi. • PVS assembly with Mounting Bracket, Cables, and Display Cap with Grommet (There are 5 cables in the neck) • Center Console Keypad Assembly • Entertainment Headphone Jack and Mount • (2) 5” Tie straps • (2)M8 x 20mm Buttonhead Screws • (1)M8 x 20mm Buttonhead screw (E-TRi only) • (1)M8 Nut (E-TRi only) • 60w Power Supply • F-Type to PAL/SECAM Coaxial Adapter • Power Cord, CEE 7/7 (NOT INCLUDED IN THE E-TRi KIT) • Power Cord, Nema 6-15 (NOT INCLUDED IN THE E-TRi KIT) • Power Cord, BS 1363 (NOT INCLUDED IN THE E-TRi KIT) • Owners Manual Required Tool for Installation Supplied • 5MM Hex Allen Key Not Supplied • #2 Phillips Screwdriver • 1/2” Wrench (for E-TRi Kits only) • Wire Cutters • Step Stool STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE The Star Trac Personal Viewing Screen is different for each of your Star Trac E-Series Cardio products. Make sure you have the proper kit for the E-Series product you are installing. The E-UBi, E-RBi, E-TBTi, and the E-STi will follow the same basic steps for installation. For the E-TRi turn page 18 in this section. To install on the E-UB, E-RB, E-TBT, and the E-ST, follow these steps: STEP 1 Using a #2 Phillips screwdriver, remove the (8) screws on the back of the display plastic. Set the screws aside, you will need them for reassembly. STEP 2 After the screws have been removed, carefully open the display plastic, so as to not detach the inner cables from the display. Disconnect the ground wire between the Heart Rate board and the display mount. STEP 3 Disconnect the 12-pin serial connector and the Heart Rate cable from the display. 1 2 3 10 STAR TRAC PERSONAL VIEWING SCREEN OWNER’S MANUAL INSTALLING YOUR PERSONAL VIEWING SCREEN (PVS) 1 2 3 After all the cable/harnessing has been disconnected, place the front display plastics aside for later use...
Otros modelos de este manual:Formadores - E-RBi (4.95 mb)
Formadores - E-TBTi (4.95 mb)
Formadores - E-TRi (4.95 mb)
Formadores - E-UBi (4.95 mb)