Votos - 5, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Vision Fitness X6200HRT |
Resumen del manual
Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer. If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12. NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw. 5STEP1STEP4STEP3STEP2STEP TOOLS & PARTS INCLUDED Screwdriver 6mm L-Shaped Wrench PARTS BOX Console Mast Boot Dual-Action Link Arm Covers Dual-Action Axle Covers Rear Stabilizers Pedal Arm Bracket Covers Pedal Support Bracket Water Bottle & Cage Power Supply Heart Rate Chest Strap (X6200HRT Only) Color-coded Hardware Bags Owner’s Guide Assembly Guide Warranty Card 5mm L-Shaped Wrench 5mm T-Shaped Wrench 13mm Wrench ORANGE BAG PINK BAG BLACK BAG GREEN BAG M8x13L Screw Quantity: 6 8x35x2T Washer Quantity: 2 20x29x1.5T Wavy Washer Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Screw Quantity: 2 M5x10L Screw Quantity: 4 8x14x1.5T Washer Quantity: 3 M8x60L Screw Quantity: 3 25x34x2T Wavy Washer Quantity: 2 8x25x1.5T Washer Quantity: 2 M8x30L Screw Quantity: 2 BLUE BAG M5x10L Screw Quantity: 2 8x30x1.5T Washer Quantity: 2 5x10x1T Washer Quantity: 2 Rubber Nut Cap Quantity: 2 5x10x1T Washer Quantity: 4 Link Arm Sleeve Quantity: 2 25x34x2T Wavy Washer Quantity: 2 M8x20L Screw Quantity: 2 M8x15L Screw Quantity: 2 8x16x1.5T Washer Quantity: 2 ORANGE BAG PINK BAG BLACK BAG GREEN BAG M8x13L Screw Quantity: 6 8x35x2T Washer Quantity: 2 20x29x1.5T Wavy Washer Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Screw Quantity: 2 M5x10L Screw Quantity: 4 8x14x1.5T Washer Quantity: 3 M8x60L Screw Quantity: 3 25x34x2T Wavy Washer Quantity: 2 8x25x1.5T Washer Quantity: 2 M8x30L Screw Quantity: 2 BLUE BAG M5x10L Screw Quantity: 2 8x30x1.5T Washer Quantity: 2 5x10x1T Washer Quantity: 2 Rubber Nut Cap Quantity: 2 5x10x1T Washer Quantity: 4 Link Arm Sleeve Quantity: 2 25x34x2T Wavy Washer Quantity: 2 M8x20L Screw Quantity: 2 M8x15L Screw Quantity: 2 8x16x1.5T Washer Quantity: 2 1STEP• For ease of assembly, place a block (about 2” thick) under the rear of the frame. • Slide the axle through the plastic sleeves of the right guide rail and the frame. Slide the left guide rail onto the left side of the axle. • Slide the right stabilizer onto the right side of the axle and the left sta- bilizer onto the left side of the axle. Fix each side in place with a washer (8x16x1.5T) and screw (M8x15L). Tighten with a 5mm T-shaped wrench. ORANGE BAG • For ease of assembly, place a block (about 2” thick) under the rear of the frame. • Slide the axle through the plastic sleeves of the right guide rail and the frame. Slide the left guide rail onto the left side of the axle. • Slide the right stabilizer onto the right side of the axle and the left sta- bilizer onto the left side of the axle. Fix each side in place with a washer (8x16x1.5T) and screw (M8x15L). Tighten with a 5mm T-shaped wrench. ORANGE BAG 1STEPGuide Rail Axle Stabilizer 5 2STEP• Slide a wavy washer (25x34x2T) onto the right rotation axle. Slide the bushing housing of the right pedal arm onto the right rotation axle. The pedal arm roller wheel should be placed in the groove of the guide ...
Otros modelos de este manual:Formadores - X6100 (1.22 mb)