Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
SAVE THESE INSTRUCTIONS. 2 WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Rear Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the lable in location shown. 3 HARDWARE PACK 4 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Main Frame (#1) to the Front Stabilizer (#2). Secure it with two M10 x 2 .” Carriage Bolts (#21), one Bracket (#15), two . .” Washers (#27), and two M10 Aircraft Nuts (#28). B.) Attach the Main Frame (#1) to the Rear Stabilizer (#3). Secure it with two M10 x 2 .” Carriage Bolts (#21), one Bracket (#15), two . .” Washers (#27), and two M10 Aircraft Nuts (#28). DIAGRAM 1 5 STEP 2 (See Diagram 2) A.) Slide the Sliding Block (#5) onto the Incline Adjustment Bar (#4). B.) Attach both ends of Incline Adjustment Bar to the open brackets on the Main Frame (#1). Secure each end with one M10 x 2 .” Carriage Bolt (#22), O .” Washer (#27), and M10 Aircraft Nut (#28). C.) Use a Lock Knob (#16) to lock the desired incline position. D.) Attach the Handle (#29) to the Main Frame. Secure it with one M10 x .” Allen Bolt (#33) and O .” Washer (#27). DIAGRAM 2 6 STEP 3 (See Diagram 3) A.) Attach the lower holes on the Backrest Supports (#7) to the pivot on the Sliding Block (#5). Secure them with one M12 x 6 .” Allen Bolt (#19), two . 1” Washers (#25), and one M12 Aircraft Nut (#26). B.) Attach the Seat Support Frame (#6) to the hole on the Backrest Support (#7). Make sure the Seat Support Frame is on the outside of the Backrest Support. Align the holes and secure them with one M12 x 2 .” Allen Bolt (#20), two O 1” Washers (#25), and one M12 Aircraft Nut (#26). Repeat the same step to install the other side. Note: The Bolt must be inserted from inside of Backrest Support to the outside of the Seat Support Frame. C.) Loosen up the Knob Bolt on the Sliding Track to adjust the position so the front end of the two Seat Support Frames (#6) can be aligned to the pivot on the Main Frame (#1). Secure them with one M12 x 8 .” Allen Bolt (#18), two O 1” Washers (#25), and one M12 Aircraft Nut (#26). DIAGRAM 3 7 STEP 4 (See Diagram 4) A.) Insert the Foam Tube (#10) halfway through the hole on the Main Frame (#1). Push two Vinyl Foam Rolls (#12) onto the Foam Tube from both ends. Plug the Foam Roll End Caps (#11) into the ends. B.) Place the Seat (#8) onto the Seat Support Frames (#6). Secure it with four M8 x 2” Allen Bolts (#23) and . 5/8” Washers (#24). C.) Place the Backrest Board (#9) onto the Backrest Supports (#7). Secure it with four M8 x 2” Allen Bolts (#23) and . 5/8” Washers (#24). DIAGRAM 4 8 EXPLODED DIAGRAM 9 PARTS LIST KEY NO. 1 234 6 7 8 9 11 12 13 14 16 17 18 19 21 22 23 24 26 27 28 29 31 32 33 34 DESCRIPTION Q’ty Main Frame 1 Front Stabilizer 1 Rear Stabilizer 1 Incline Adjustment Bar 1 Sliding Block 1 Seat Support Frame 2 Backrest Support 2 Seat 1 Backrest Board 1 Foam Tube 1 Foam Roll End Cap 2 Vinyl Foam Roll 2 Sliding Block Sleeve 2 2 .” x 2” End Cap 4 Bracket 2 Lock Knob 1 1 5/8” x .” End Cap 12 M12 x 8 .” Allen Bolt 1 M12 x 6 .” Allen Bolt 1 M12 x 2 .” Allen Bolt 2 M10 x 2 .” Carriage Bolt 4 M10 x 2 .” Carriage Bolt 2 M8 x 2” Allen Bolt 8 . 5/8” Washer 12 O 1” Washer 8 M12 Aircraft Nut 4 O .” Washer 7 M10 Aircraft Nut 6 Handle 1 Wheel 2 Handle Grip 2 M8 x 1 .” Allen Bolt 2 M10 x .” Allen Bolt 1 M8 Aircraft Nut 2 10 IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages....