Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Invacare Tamaño del archivo: 606.46 kb Nombre del archivo: Idioma del manual:

6801A, 6803A, 6808A, 6815A, 6816A, IH5748A, IHRAILTS-DLX SAVE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer/Carrier for further instructions. Safety Summary WARNING DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occur. These bed rails are intended to prevent an individual from inadvertently rolling out of bed. DO NOT use for restraint purposes. DO NOT use the bed rails as push handles for moving the bed. ALWAYS test to make sure that the bed rails are properly and securely in place before using. Although bed rails are not rated to any specific weight limitation, the bed rails may become deformed or broken if excessive side pressure is exerted on the bed rails. This bed rail is not an assist rail for getting into or out of bed. DO NOT use the bed rails as push handles when moving the bed. ACCESSORIES WARNING Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. ENTRAPMENT WARNING Proper patient assessment and monitoring, and proper maintenance and use of equipment is required to reduce the risk of entrapment. Variations in bed rail dimensions, and mattress thickness, size or density could increase the risk of entrapment. Visit the FDA website at to learn about the risks of entrapment. Review “A Guide to Bed Safety”, published by the Hospital Bed Safety Workgroup. Refer to the bed owner’s manuals for additional product and safety information. Mattress MUST fit bed frame and bed rails and/or positioning device snugly to reduce the risk of entrapment. After any adjustments, repair or bed service and before use, make sure all attaching hardware is tightened securely. Rails and/or positioning devices with dimensions different from the original equipment supplied or specified by the bed manufacturer may not be interchangeable and may result in entrapment or other injury. Installing/Using the Epoxy Bed Rails NOTE: For this procedure, refer to FIGURE 1. Installing 6801A and 6808A Bed Rails 1. Position the pivot brackets on the bed frame as shown in Details “A” and “B” of FIGURE 1. 2. Loosely attach the pivot brackets to the bed frame with the hex bolts and locknuts. NOTE: DO NOT tighten the hex bolts and locknuts at this time. 3. Slide the mounting pins of the bed rails through the pivot tubes. NOTE: Make sure the release lever on the bed rail is pointing towards the foot end of the bed. For more information regarding Invacare Continuing Care, Inc. (ICCI) products, parts, and services, please visit or call 800-668-2337 Part No 1143214 1 ICCI Bed Rails and Accessories Release Lever DETAIL “B” - FOOT END TOP VIEW DETAIL “A” - HEAD END TOP VIEW Bed Rail (on the outside of bed frame) Bed Frame Bed Rail (on the outside of bed frame) Crossmember Inside of Bed Frame Socket Screw Pivot Tube Mounting Pin Socket Screw Mounting Pin Bed Rail (on the outside of bed frame) Pivot Bracket Hex Bolt and Locknut Pivot Tube Pivot Bracket Hex Bolt and Lo...

Descargar ahora

Introduzca dos números de la imagen: