invacare .com USA One Invacare Way Elyria, Ohio 44036-4028 )333-6900 Canada 5970 Chedworth Way Mississauga, Ontario L5R 3T9 Canada (800) 668-5324 Invacare, Yes, you can. and Turn-Q are trademarks of Invacare Corporation. Specifications are subject to change without notification. © 2000 Invacare Corporation Form No. 97-35 Rev. 05/00

The MNS600 has a robust, lightweight, and easy-to-transport power unit that inflates the mattress in less than 5 minutes. Caregiver-friendly controls and several valuable user functions — including Auto-Firm, CPR deflate and simplified patient weight settings — further enhance the advanced therapeutic performance of the MNS600. Features Adjustable modes for pressure relief and rotation therapy at 15, 25, 30 and 45 degrees Variable rotation times of 20, 30 and 60 minutes Static mode, left tur

The MNS500 also provides the benefit of true low air loss for pressure ulcer therapy. Features • 135 liters per minute of fresh, dry air circulates between the patient and the support surface • 8" air cell height for deep patient immersion • Waterproof, vapor permeable therapy pad provides a low friction surface • Provides pressure relief below capillary closure • Pulsate option - every 45 seconds, the pressure increases and decreases in each cell User-Friendly Controls • Auto-firm mode

6 Typical Product Parameters ................................................................................................................................................................................................................ 7 5 GENERAL GUIDELINES 10 General Guidelines .........................................................................................................................................................................................................................

© 2011 Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by ™ and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. Invacare®MA60 Series 2 Part No 1148137 2 GENERAL 2 General 2.1 Symbols Warnings Signal words are used in this manual and apply to hazards or unsafe practices which could result in

Refer to the owner’s manual provided with the bed. 2. Engage the wheel locks of the wheelchair, if applicable. Refer to the owner’s manual provided with the wheelchair. 3. Press the Max Inflate or Mode button to achieve maximum mattress pressure. 4. Raise or lower the bed to match the wheelchair height. Refer to the owner’s manual provided with the bed. 5. When the mattress has reached maximum firmness, perform one of the following: • Bed to Wheelchair Transfer - Slide the patient onto the wheel

• MA55 - Press and hold the Mode and Fowler buttons. 3. Read the LCD Display. The LCD Display will flash: • 0 if the current setting is 0 (2 mmHg). • 5 if the current setting is 50% of the selected pressure. 4. Perform one of the following to toggle between the two settings: • MA50 and MA51 - Press the Static/Alternating Pressure button. • MA55 - Press the Static/Alternating Pressure button. 5. Press the Power button to save the setting. Firm/Soft Buttons 1. Select comfort pressure settings by

DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occu

This will deactivate the Max Inflate LED. It is recommended that Max Inflate setting be used during patient ingress/egress, patient wound care, patient turning or patient cleaning. • Low Air Loss Mode - In this mode, the mattress goes into on-demand low air loss relief mode. Invacare® MA90Z Series Mattresses 24 Part No 1148139 4 OPERATION Max Inflate Button (MA95Z Power Unit) 1. Press the Max Inflate button ( ) to select the max inflate mode and inflate the mattress rapidly to maximum firmness (

Invacare product manuals are available at or your dealer. • Refer to the instructions provided with the side rails for the installation procedure. 4.3 Installing the Power Unit Bed Hook 1. Pull out the bed hook on the back of the control unit. 2. Place the control unit on the footboard. If the bed does not have a footboard, place the • control unit on a flat surface, leaving room for the hose to hang down. FIGURE 2 Installing the Power Unit 4.4 Connecting the Hose CAUTION . Ensure that the hose