Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
datos de dispositivos de procesamiento - HP StorageWorks Director 2/64 base 32 port config (4.99 mb)
datos de dispositivos de procesamiento - HP StorageWorks Director 2/64 base 32 port config (187.8 kb)
datos de dispositivos de procesamiento - HP StorageWorks Director 2/64 base 32 port config (317.15 kb)
Resumen del manual
Module Removal Procedure
Module Removal Procedure
Caution: Refer to the specific FRU removal and replacement procedures
located in the appropriate Director service manual before performing a FRU
repair. This reference gives additional steps that are required to reduce the
possibility of problems or customer down time.
To remove a card:
1. Insert the torque tool into the locking Allen screw at the bottom of the card.
Turn the screw counterclockwise until the spring releases and the tool turns
freely. The module is now unlocked.
2. Insert the torque tool into the top Allen screw at the top of the card. To unseat
the card and back it out of the backplane, turn the screw counterclockwise
until the tool turns freely.
3. Pull the card from its card track and remove it from the Director chassis. Place
the card in an antistatic bag to provide ESD protection.
Module Installation Procedure
To replace a card:
1. Insert the torque tool into the top Allen screw at the top of the card. Turn the
torque tool clockwise until you feel it release and hear a clicking sound. As
the screw turns clockwise, the card inserts into the backplane connector.
2. Insert the torque tool into the locking Allen screw at the bottom of the card.
Turn the torque tool clockwise until you feel it release and hear a clicking
sound. As the screw turns clockwise, the card locks into place.
2
Director Torque Tool Caution Read Me First
...Otros modelos de este manual:
datos de dispositivos de procesamiento - HP StorageWorks Director 2/64 (60.64 kb)
datos de dispositivos de procesamiento - HP StorageWorks Director 2/140 (60.64 kb)