READ ME FIRST
HP StorageWorks
ESL E-Series Tape Libraries
Ultrium 960 Drive Upgrade
read me first
When you install an Ultrium 960 native FC tape drive in your ESL E-Series Tape Library, you may also need to
upgrade the associated cluster controller. The cluster controller that is compatible with the Ultrium 960 has an
“L3”sticker or an “A” sticker on the faceplate of the card (see Figure 1 and Figure 2).
Figure 1 Cluster controller with L3 sticker
Figure 2 Cluster control er with A sticker
If your cluster controller does not have one of these stickers, contact your HP service provider and order the
replacement cluster controller, part number 396076-001. Replace the existing cluster controller following the
instructions provided with the replacement (ESL E-Series Cluster Controller replacement poster, part number
350804-001). Return the original cluster controller to HP.
CAUTION: Before you install the Ultrium 960 tape drive, update Interface Manager card firmware, interface
controller card firmware, and library firmware. This ensures that your library will power on after the tape drive is
installed.
*389609-003*
389609-003
© Copyright 2004-2005 Hewlett-Packard Development Company, L.P.
Printed in the US June 2005
Product names mentioned herein may be trademarks of their respective companies as reflected by an
associated footnote. The information in this document is subject to change without notice.

---

...

Otros modelos de este manual:
datos de dispositivos de procesamiento - HP ESL 712e Ultrium Tape Library (95.76 kb)
datos de dispositivos de procesamiento - HP StorageWorks ESL 286e 286 Slot SDLT Library (95.76 kb)
datos de dispositivos de procesamiento - HP StorageWorks ESL 286e SDLT Tape Library (95.76 kb)
datos de dispositivos de procesamiento - HP StorageWorks ESL 322e 322 Slot Ultrium Library (95.76 kb)