Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario HP, modelo HP AG321A MSL4048 2 Ultrium Drive Tape Library

Fabricar: HP
Tamaño del archivo: 809.38 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


HP StorageWorks
WARNING!
MSL8096 Tape Library
The HP StorageWorks MSL8096 Tape Library weighs 46.6
kg (102.7 lb) without media and 68.8 kg (151.7 lb) with

media (96 cartridges). When moving the Tape Library, to
reduce the risk of personal injury or damage to the Tape
Library: 1) observe local health and safety requirements
Front bezel replacement
and guidelines for manual material handling, 2) always
remove al tapes to reduce the overal weight of the Library,
and 3) obtain adequate assistance to lift and stabilize the
Library during instal ation or removal.
CAUTION:
Parts can be damaged by electrostatic discharge. Keep
parts in electrostatic containers until needed. Ensure you
are properly grounded when touching static sensitive
components.
The front bezel is an optional customer self repair
part. HP customer self repair (CSR) programs allow
you to repair your StorageWorks product. If a CSR
Replacing the front bezel
part needs replacing, HP ships the part directly to
you so that you can instal it at your convenience.
For this procedure you wil need:
For more information about CSR, contact your local
• #1 stubby Phillips screwdriver
service provider. For North America, see the CSR
• #2 Phillips screwdriver
website: www.hp.com/go/selfrepair
• Straightened paperclip or small metal pin
• A second person to help remove magazines if you
cannot reach both the front and back of the Library at
the same time.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
From the front panel, power down the Library.
First edition March 2007
The information in this document is subject to change without
notice.
Printed in the US
www.hp.com
2
1
11214
Remove the magazines on one side by (1) inserting a
straightened paperclip or small metal pin into one of the
magazine release holes, while another person (2) grasps
all of the magazines and pul s them out about 2 cm (1
inch). Once the magazines are clear of the lock, pull each
magazine out individually.
Repeat for the magazines on the other side.
AH218-96012


...

Otros modelos de este manual:
datos de dispositivos de procesamiento - HP MSL Tape Library (809.38 kb)
datos de dispositivos de procesamiento - HP MSL2024 0-Drive Tape Library (809.38 kb)
datos de dispositivos de procesamiento - HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library (809.38 kb)
datos de dispositivos de procesamiento - HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library (809.38 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría