Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Fixes
•
Fixed a rare case where a tape could not be read if the CM was not accessible.
•
Fixed a corner case where the drive could appear unresponsive while reading an encrypted tape.
•
Fixed a rare case that will increase the reliability of future firmware downloads.
Installation instructions
MSL6480 RMI
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage.
2.
Log into the RMI as the administrator user.
3.
Navigate to the Maintenance > Software Upgrades > Drive Firmware screen. The tape drives are
organized by drive type.
4.
Click Browse, and then select the file from the local computer.
5.
Click Submit.
MSL6480 OCP
1.
Copy the firmware file to a USB flash drive.
2.
Log into the OCP as the administrator user.
3.
Insert the USB flash drive into the USB port on the front of the library.
The library detects the USB drive.
4.
Select the firmware file.
5.
Click Start Upgrade.
1/8 G2 Tape Autoloader, MSL2024, MSL4048, MSL8048, or MSL8096 RMI
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage.
2.
Log into the RMI as the administrator user.
3.
In the Support: Firmware page, select the tape drive, browse to the location of the tape drive
firmware file, and click Update.
4.
Repeat step 3 to update firmware for additional tape drives in the Library.
1/8 G2 Tape Autoloader or MSL2024 OCP
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage. Copy the firmware onto the USB flash drive.
2.
Insert the USB flash drive into the USB port on the back of the Library.
3.
From the Home screen, press Next until the screen displays Support. Press Enter to select.
4.
Press Next until the screen displays Drive FW upgrade. Press Enter to select.
5.
Enter the administrator password if prompted.
6.
Press Next until the screen displays the filename of the tape drive firmware file on the USB drive.
Press Enter to select the firmware file.
7.
If the upgrade failed, press Enter to display the error code and message describing the cause of
the failure.
8.
When the upgrade is complete, remove the USB flash drive from the USB port.
MSL4048, MSL8048, or MSL8096 OCP
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage. Copy the firmware onto the USB flash drive.
Fixes
3
...Otros modelos de este manual:
datos de dispositivos de procesamiento - HP MSL Tape Library (74.56 kb)
datos de dispositivos de procesamiento - HP MSL2024 0-Drive Tape Library (74.56 kb)
datos de dispositivos de procesamiento - HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library (74.56 kb)
datos de dispositivos de procesamiento - HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library (74.56 kb)