Votos - 3, Puntuación media: 4 ( )

Fabricar: GE Tamaño del archivo: 487.87 kb Nombre del archivo: Idioma del manual:

• If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS! OTHER CONSUMER SAFETY INFORMATION This appliance is for HOUSEHOLD USE ONLY. WARNING! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or using an adaptor. If the plug does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet. Use the iron on an ironing board. Ironing on any other surface may damage that surface. Do not iron or vertical steam clothes that are being worn. Do not use vertical steam in the direction of people or pets. PARTS 4 5 7 8 9 3 1 2 10 6 11 13 12 14 15 9. Power ON/Auto Shutoff Reset Button/Light 10. Heel Rest 11. Adjustable Steam Switch 12. Blast of Steam Button 13. Spray Button 14. Retractable Cord (on select models) 15. Cord Release Button (on select models) 1. Cord 2. Blast of Steam/Spray Buttons (see inset) 3. Adjustable Steam Switch (see inset) 4. Water Tank Opening 5. Spray Nozzle 6. Water Window 7. Temperature Control Dial 8. Soleplate OPERATION Before first use • Steam vents (located on bottom of soleplate) should be cleaned before first use. • During the first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. • To clean steam vents before first use, prepare iron for steam ironing. See “To steam iron” section. Then iron over an old cloth for a few minutes while letting the iron steam. Press the Blast of Steam button several times to clean the vents. Then follow the instructions in “Cleaning—How to clean.” • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. To dry iron • Plug iron into outlet. • Turn Adjustable Steam Switch to Dry Iron O. • Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. • To turn iron OFF (O), turn Temperature Control Dial to OFF (O) and unplug iron. To steam iron • Unplug iron. Turn Adjustable Steam Switch to Dry Iron O. Set iron upright on heel rest. • Using a cup, slowly pour tap water into water tank opening until MAX fill line has been reached. Do not fill iron directly from the faucet. • Plug iron into outlet. • Turn the Temperature Control Dial to desired fabric setting in the steam range. • Allow two minutes for the iron to reach desired temperature. • Set Adjustable Steam Switch to the recommended steam level. See the “Fabric Setting Chart.” • To turn iron off, set Adjustable Steam Switch to Dry Iron O. Turn the Temperature Control Dial to OFF ( O ). Unplug iron. • Empty water from the iron following directions in “Cleaning—...

Descargar ahora

Introduzca dos números de la imagen: