Votos - 1, Puntuación media: 4 ( )

Fabricar: GE Tamaño del archivo: 487.87 kb Nombre del archivo: 2009923152715420.pdf Idioma del manual:

If you have extremely hard water, alternate between tap water and distilled water for use in the iron. FABRIC SETTING CHART Steam Setting Temperature Setting Ironing Instructions Dry IronO Off Nylon, Acrylic Silk Polyester • • •• Dry iron using spray if necessary. Dry iron on the wrong side of the fabric. Iron while fabric is still damp. Steam RangeWool Rayon Cotton, Linen •• ••• ••• Use a press cloth and steam iron on the wrong side of fabric. Iron using spray if necessary. For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side. CLEANING Iron • The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to OFF ( O ). Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening. • After iron has completely cooled, fully retract cord into iron or loop cord loosely around iron, as applicable, and store in an upright position. NOTICE: Do not store iron laying flat on soleplate. Soleplate • Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate. • To clean occasional buildup on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads. • Always store iron upright in the heel rest position. How to clean To keep the steam vents clear of any buildup and to avoid damaging the soleplate, follow these instructions each time you iron using steam. • Turn Temperature Control Dial to OFF ( O ) and set Adjustable Steam Switch to Dry Iron O. Fill iron with water to 1.2 of its maximum capacity. • Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes. Keep Adjustable Steam Switch on Dry Iron O. • Turn Temperature Control Dial to OFF ( O ). Unplug iron and hold over a sink with soleplate facing down. • Turn Adjustable Steam Switch to MAX, while pressing Blast of Steam button often. Boiling water and steam will flow out of steam vents. Allow all water to drain from iron. • Gently tilt iron up and down to allow water to clean entire soleplate area. • If water still remains inside of soleplate, reheat iron as indicated in Step 2. Boiling water and steam could still flow out of steam vents. FEATURES (on select models) Adjustable Steam Switch This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting Chart” for details. Set the switch to Dry Iron O to iron without steam. Spray and Blast of Steam Buttons Push Blast of Steam Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Power ON/Auto Shutoff Reset Button/Light This light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button/Light to turn the iron back on. Power ON Light On units not provided with Auto Shutoff, this light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on...

Descargar ahora

Introduzca dos números de la imagen: