Votos - 5, Puntuación media: 4 ( )

Fabricar: Philips Tamaño del archivo: 1.17 mb Nombre del archivo: Idioma del manual:

16). 3 Let the iron cool down in a safe place. 4 Wind the mains cord and fix it with the cord binder (Fig. 17). 5 Store the iron on its heel on a stable surface. Heat-resistant protective cover (GC4444, GC4440 only) You can store the iron on the heat-resistant protective cover immediately after ironing. It is not necessary to let the iron cool down first. Do not use the heat-resistant protective cover during ironing. 1 Put the iron on the heat-resistant protective cover (Fig. 18). 2 Insert the tip of the soleplate into the heat-resistant protective cover (1) and then press down the heel of the iron (2). Environment - Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 19). Guarantee & service If you need information or if you have a problem, please visit the Philips website at or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV Troubleshooting If the appliance does not work or does not work properly, first check the list below. If the problem is not mentioned in this list, the appliance probably has a defect. In that case we advise you to take the appliance to your dealer or to an authorised Philips service centre. Problem Possible cause Solution The iron is plugged in, but the soleplate is cold. There is a connection problem. Check the mains cord, the plug and the wall socket. The temperature dial is set to MIN. Set the temperature dial to the required position. The iron does not produce any steam. There is not enough water in the water tank. Fill the water tank (see chapter 'Preparing for use', section 'Filling the water tank'). The steam control is set to position 0. Set the steam control to a position between 1 and 6 (see chapter 'Using the appliance', section 'Steam ironing'). The iron is not hot enough Set an ironing temperature that is suitable and/or the drip-stop for steam ironing (•• to MAX). Put the iron function has been activated. on its heel and wait until the temperature light has gone out before you start ironing. 12 ENGLISH Problem Possible cause Solution The iron does not produce a steam boost. You have used the steam boost function too often within a very short period. Continue ironing in horizontal position and wait a while before you use the steam boost function again. The iron is not hot enough. Set an ironing temperature at which the steam boost function can be used (••• to MAX). Put the iron on its heel and wait until the temperature light has gone out before you use the steam boost function. Water droplets drip onto the fabric during ironing. You have not closed the cap of the filli...

Descargar ahora

Introduzca dos números de la imagen: