Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Fisher & Paykel Tamaño del archivo: 2.42 mb Nombre del archivo: Idioma del manual:

Improper flame size Figure 2 9 Setting Surface Controls Setting the Dual Burner (present on Models 790.3248 & 790.3249 only) The Dual Burner has two rings of flame that you can control for two different heat levels, one for small and one for large cookware. Small Cookware Operation (Figure 1 ; Zone A) 1. Place a small cooking utensil centered over the surface Burner Grate. 2. Push the surface control knob in and turn counterclockwise out of the OFF position (See Figures 2 & 3). 3. Release the knob and rotate to the LITE position. Note: All electronic surface ignitors will spark at the same time. However, only the Dual Burner will ignite. Figure 1 4. Visually check that zone A & B of dual burner has lit. 5. Continue to rotate the gas control knob counterclockwise past the first LO setting to the arrow marked Single; zone B will turn off. Adjust the flame size by turning the control knob between the single HI and LO settings. DO NOT cook with the surface control knob in the LITE position (The electronic ignitor will continue to spark if the knob is left in the LITE position), Large Cookware Operation (Figure 1 ; Zone A & B) 1. Place a large cooking utensil centered over the dual surface Burner Grate, 2. Push the surface control knob in and turn counterclockwise out of the OFF position. 3. Release the knob and rotate to the LITE position (Figures 2 & 3). Note: All electronic surface ignitors will spark at the same time. However, only the selected surface Burner will lite. 4. Visually check that zone A & B of the dual burner has lit. 7. When both zones are lit, continue to turn the control knob counterclockwise between dual Hi & LO to adjust to the desired flame size for both burners together. Note: The markings between the Dual Hi and LO settings on the control knob adjust the flame size for both zone A & B (Refer to Figure 2 or 3). DO NOT cook with any of the surface control knobs in the LITE position (The electronic ignitor will continue to spark if the knob is left in the LITE position). Figure 2 I Center Portion LO "of the Dual Burner adjustment area OFF Hi Single / Figure 4 Dual I Center + Outer Portions Lite position of the Dual Burner adjustment area Figure 3 10 General Care & Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOV ERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE DIFFICULTY AND EXTENT OF A MAJOR CLEANING LATER. Surfaces Aluminum (Trim Pieces) & Vinyl Painted and Plastic Control Knobs, Body Pieces, and DecorativeTrim Control Panel L', .... lh Stainless Steel, Chrome Decorative Trim Porcelain Enamel Burner Grates, Burner Pans (some models), Burner Skirts (some models), Cooktop Surface Surface Burners How to Clean Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth. For general cleaning, use hot soapy water and a cloth. For more difficult soils and built- up grease, appl...

Descargar ahora

Introduzca dos números de la imagen: