Votos - 2, Puntuación media: 4 ( )

Fabricar: GE Tamaño del archivo: 2.82 mb Nombre del archivo: Idioma del manual:

When range is level, cooktop may appear out of alignment if countertop is not level (See the Range Installation instructions). Weak, unstable floor. Be sure floor is level and carpenter to correct sagging or sloping floor. can adequately support range. Contact a Kitchen cabinet misalignment may make range appear square and have sufficient room for range clearance. to be unlevel. Be sure cabinets are Cannot move appliance easily. Appliance must be accessible service. for Cabinets not square or are Contact builder or installer built in too tight. Contact a cabinet to make appliance accessible. maker to correct the problem. Carpeting interferes with range. Provide sufficient space so range can be lifted over carpet. Surface enough, element too hot or not hot Incorrect surface wish to heat. control setting. Make sure the correct control is set for the surface area you Surface element does not heat. Light-weight or warped cookware was used. Use only flat, evenly balanced, medium or heavy-weight cookware. Flat pans heat much better than warped pans. Cookware materials and weight of the material affect heating results. Heavy and medium-weight pans heat evenly. Because light-weight pans heat unevenly, foods may burn easily. _ _f_ Oven does not operate. No electrical power to the appliance. Check Operate" in this "Before You Call" checklist. steps under "Entire Appliance Does Not Be sure the oven controls are Controls" or "Entire Appliance set correctly for the desired function. See "Setting Oven Does Not Operate" in this "Before You Call" checklist. The time of day must first be set on the clock in order to operate the oven. Entire appliance does not operate. Make sure electrical cord/plug is plugged tightly into outlet. Service wiring is not complete, Call 1-800-4-MY-HOME® (See back cover), Electrical service. power outage. Check house lights to be sure, Call your local electric company for Oven light(s) does not work. Burned-out replace or or loose bulb. See "Replacing tighten the bulb(s). Oven Light" section in this Use & Care Guide to Electrical service. power outage. Check house lights to be sure. Call your local electric company for Oven smokes broiling. excessively during Meat is too close to the broil element. Reposition between the meat and the oven broil element. the rack to provide more clearance Meat is not properly prepared. Remove edges to prevent the meat from curling, excess fat from meat. Remove remaining but do not cut into the lean of the meat. fatty Broiler Broiler Pan used without the Broiler Pan Insert or insert is covered with foil, Pan without the Broiler Pan Insert or cover the insert with foil. DO NOT use the Broiler grease grease basis. Pan, Broiler Pan Insert or grease build-up undeneath the 6th rack position. Clean from below the 6th rack positiojn. Excessive smoking is caused by a build-up of or food spatters. If the Broiler Pan and insert is used often, clean these o...

Descargar ahora

Introduzca dos números de la imagen: