Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Congratulations! The Specialized bicycle you have chosen is among the finest of advanced composite products available in cycling. Carbon fiber is a very special material that requires particular care during assembly, storage and riding. This short form installation guide contains instructions and warnings, plus torque specifications. Please read the following instructions. If you have any doubt regarding your mechanical ability and/or installation of this product, visit your local authorized dealer. Specialized recommends that components be installed on the frame using a torque wrench, by a qualified mechanic. Please read the following Warnings. Because the failure to follow any Warning may result in a catastrophic failure of the frame, resulting in serious personal injury or death, this phrase may not be repeated in connection with each Warning. To ensure the best assembly possible and to prevent any damage to the components or frame, follow all torque specifications. Please refer to the specific owner’s manual for mating component’s correct torque specifications. If the mating component’s recommended torque exceeds the frame’s recommended torque, use the lower torque spec. Due to torque considerations, not all components will be compatible. The seat post is marked with a minimum insertion line, which is the minimum insertion required for the seat post to remain structurally safe. WARNING! Do not extend seat post above the minimum insertion line. Extension beyond the minimum insertion line can result in failure. HEADSET 123341. Cone spacer/cap2. Compression ring3. 1 1/8” Bearing4. Crown race Your Specialized frame does not require any head tube pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the cups. Use 42mm Campagnolo Standard compatible bearings. No tools are required for installation or removal of 42mm Campagnolo Standard MindSet bearings. BOTTOM BRACKET Your Specialized frame does not require any bottom bracket pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the threads. It is acceptable to chase the threads if applicable and necessary. Do not face bottom bracket cups. THREADED: Ensure that the bottom bracket shell threads are clean and greased prior to installation. Recommended torque is 442 in-lbf (50 N-m). OVERSIZED BB: Please refer to the carbon crank installation guide for assembly instructions and compatible tools. WARNING! Failure to follow the torque specifications in this installation guide will void the warranty, but most importantly may result in damage to the frame which may not be visible. If the frame is damaged, this can result in loss of structural integrity, which may result in serious personal injury or death. Bicycle components such as a handlebar, handlebar stem, seat post, saddle, brakes, all must be compatible with each other, the frame and the intended use. Any doubt regarding compatibilit...
Otros modelos de este manual:bicicletas - S-Works SL (127.42 kb)
bicicletas - Sirrus Ltd - Expert (127.42 kb)