Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
If the mating component’s recommended torque exceeds the frame’s recommended torque, use the lower torque spec. Due to torque considerations, not all components will be compatible. The seat post is marked with a minimum insertion line, which is the minimum insertion required for the seat post to remain structurally safe. WARNING! Do not extend seat post above the minimum insertion line. Extension beyond the minimum insertion line can result in failure. HEADSET 123341. Cone spacer/cap2. Compression ring3. 1 1/8” Bearing4. Crown race Your Specialized frame does not require any head tube pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the cups. Use 42mm Campagnolo Standard compatible bearings. No tools are required for installation or removal of 42mm Campagnolo Standard MindSet bearings. BOTTOM BRACKET Your Specialized frame does not require any bottom bracket pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the threads. It is acceptable to chase the threads if applicable and necessary. Do not face bottom bracket cups. THREADED: Ensure that the bottom bracket shell threads are clean and greased prior to installation. Recommended torque is 442 in-lbf (50 N-m). OVERSIZED BB: Please refer to the carbon crank installation guide for assembly instructions and compatible tools. WARNING! Failure to follow the torque specifications in this installation guide will void the warranty, but most importantly may result in damage to the frame which may not be visible. If the frame is damaged, this can result in loss of structural integrity, which may result in serious personal injury or death. Bicycle components such as a handlebar, handlebar stem, seat post, saddle, brakes, all must be compatible with each other, the frame and the intended use. Any doubt regarding compatibility should be discussed with your local authorized Specialized retailer. WARNING! When placing the frame and/or bicycle in a repair stand, clamp the stand to the seat post and not the frame. Clamping the frame can cause damage to the frame that may or may not be visible. SEAT POST / SADDLE INSTALLATION COMPONENT TORQUE SETTINGS Refer to your seat post installation guide prior to installation. Specialized road frames have a 27.2mm seat post diameter and require that the seat post have a tolerance of 27.08mm to 27.25mm. The Tarmac, Roubaix and Ruby Expert/Pro/S-Works SL frames use a seat post collar specifically designed for these frames. Use of a different collar can cause damage to the frame or seatpost, resulting in failure (see fig.1 for proper setup). Tighten seat collar bolt to recommended torque of 55 in-lbf (6.2 N-m). • Front derailleur: Recommended torque is 44 in-lbf (5.0 N-m). • Rear derailleur: Recommended torque for the rear derailleur is 70 in-lbf (7.9 N-m). Ensure that threads are clean prior to installation. • Seat collar: Recommended torque is 55 in-lbf...
Otros modelos de este manual:bicicletas - SW Tricross (127.42 kb)
bicicletas - Sirrus Ltd - Expert (127.42 kb)