Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Life Fitness, modelo 15-4525

Fabricar: Life Fitness
Tamaño del archivo: 575.17 kb
Nombre del archivo: ea632d42-cfac-4b46-958d-e5912b3e6331.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


1. 2. Proper seat adjustment is important. There are twelve adjustment holes in the REAR FRAME(3). These adjustment holes allow users to adjust the position of the seat for efficient exercise. Do not attempt to adjust the seat while you are on the Air Fusion 4525 Bike. Always tighten the ADJUSTMENT KNOB(49) after adjusting the seat to a new position. To increase the load, turn the TENSION KNOB(29) clockwise. To decrease the load, turn the TENSION KNOB(29) counterclockwise. 12 OPERATIONAL INSTRUCTIONS USING THE FITNESS MONITOR OR METER POWER ON: Pedal movement or push the Mode Reset button. POWER OFF: Automatic shut off after four minutes of inactivity. FUNCTION MARKS (On The Display) : M: Speed in Miles Per Hour T : Time : Scan C : Calorie D: Distance : Pulse FUNCTION: SPEED: Displays the current speed on upper display from zero to 999.9 miles per hour. SCAN: Lower display automatically scans each function of DISTANCE, TIME, CALORIE, and PULSE in sequence every four seconds. The function mark "" must appear on display by pressing the button. DISTANCE: Press the button until "D" appears to display the distance you are traveling, from zero to 9999 miles. TIME: Press the button until "T" appears to display the riding time, from one second up to 23 hours 59 minutes. CALORIE: Press the button until "C" appears to display calorie consumption, from one to 9999 Kcal. The Calorie Display estimates the average user's calorie consumption based on the speed and time of the workout. The Calorie Display is not affected by the load adjustment. It should be used only as a comparison between workouts on this unit. PULSE: Displays your heart rate in beats per minute. To display the pulse readout, press the button until only the heart symbol " " is shown on the display. Grasp the Pulse Sensors on both sides of the handrail, one in each hand. The heart symbol " " will begin flashing when the meter senses your heart rate. Your heart rate will be displayed approximately five (5) seconds after the heart icon is displayed. If you do not place your hands correctly and 60 seconds passes without a heart rate reading, the meter will turn off the heart rate circuit. If this occurs, press the button to restart, place your hands back on the Pulse Sensors correctly, and the heart rate readout will appear. NOTE: If you want to restart and to set all the functions to zero when in use, push the button and hold it down for three seconds. HOW TO INSTALL AND REPLACE BATTERY: 1. Use hand or simple tool to pry the Meter from the side covers. 2. The Meter operates with two AA batteries (two batteries included). Refer to the illustration to install or replace the batteries. NOTE: 1. Do not mix a new battery with an old battery. 2. Use the same type of battery. Do not mix an alkaline battery with another type of battery. 3. Rechargeable batteries are not recommended. AA Batteries 13 STORAGE 1. To store the Air Fusion 4525 Bike, simply keep it in a clean dry place. 2. Adjust the SEAT FRAME(5) to the lowest position. The Air Fusion 4525 Bike is approximately 51 3/4 inches long x 24 3/8 inches wide x 35 3/4 inches tall (min.). These dimensions will vary. Please measure your Air Fusion 4525 Bike if exact dimensions are needed. 3. To move the Air Fusion 4525 Bike, lift the REAR STABILIZER(4) and the bike will roll on the WHEELS(51) on the FRONT STABILIZER(2). 4. To avoid damage to the electronics, remove the batteries before storing the Air Fusion 4525 Bike for one year or more. MAINTENANCE The safety and integrity designed into the Air Fusion 4525 Bike can only be maintained when the Air Fusion 4525 Bike is regularly examined for damage and wear. Special attention should be given to the following: 1. Adjust the TENSION KNOB(29) and verify that the TENSION BELT(28) provides tension. The TENSION BELT(28) should provide many years of use. 2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise. 3. Verify that the WARNING LABEL(78) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement WARNING LABEL(78) if it is missing or damaged. 4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed. 5. Worn or damaged components shall be replaced immediately or the Air Fusion 4525 Bike removed from service until repair is made. 6. Only Stamina Products supplied components shall be used to maintain/repair the Air Fusion 4525 Bike. 7. Keep your Air Fusion 4525 Bike clean by wiping with an absorbent cloth after use. 14 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise. Remember to follow these es...

Otros modelos de este manual:
bicicletas - 15-4525 (575.17 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría