Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Wolf Appliance Company, modelo 811504

Fabricar: Wolf Appliance Company
Tamaño del archivo: 485.06 kb
Nombre del archivo: prowallhoodinstallguide.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


. . . . . . . . . . . . . . . . . . . . . . . . . 22 Features and specifications are subject to change at any time without notice. Visit wolfappliance.com/specs for the most up-to-date information. IMPORTANT NOTE: Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified. Important Note To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: IMPORTANT NOTE highlights information that is especially important. CAUTION signals a situation where minor injury or product damage may occur if instructions are not followed. WARNING states a hazard that may cause serious injury or death if precautions are not followed. Wolf Pro Wall Ventilation Hoods wolfappliance.com/specs Pro Wall Hood Installation IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolf authorized service center technician. Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference. This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedi- cated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency, and amperage ratings are listed on the product rating plate. Record the model and serial numbers before installing the ventilation hood. Both numbers are listed on the product rating plate, located inside the left wall of the hood shell. Refer to the illustration below. WolfProWallHood Model Number Serial Number RATING PLATE (INSIDE HOOD) Location of rating plate. Installation Considerations IMPORTANT INSTRUCTIONS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING: • Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. • Two installers are recommended due to the size and weight of the pro ventilation hood. • Install the pro ventilation hood only with a blower manufactured by Wolf. • When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. • Ducted fans must always be vented to the outdoors. To reduce the risk of fire and properly exhaust air, be certain to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages. Installation Considerations Pro wall hoods are recommended for use with all Wolf cooking appliances and should be at least as wide as the cooking surface. The ventilation hood be installed 30" (762) to 36" (914) above the countertop. IMPORTANT NOTE: For optimal performance in wall hood applications, a pro 27" (686) deep wall hood is recom- mended for use with ranges and rangetops that contain a charbroiler or griddle. BLOWER ASSEMBLIES Pro ventilation hoods are shipped without the blower assembly. Internal, in-line and remote blowers are avail- able through your authorized Wolf dealer. For local dealer information, visit the find a showroom section of our website, wolfappliance.com. The blower will vary in size and is dictated by the cooking surface, the volume of air that needs to be moved and the length of the duct run. Refer to ventilation recommenda- tions in the Wolf design guide. IMPORTANT NOTE: Use only a Wolf blower with the pro ventilation hood. Pro Wall Hood Specifications wolfappliance.com/specs Overall Dimensions LOW-PROFILE WALL HOODS 12" (305) 10" (254) OVERALL HEIGHT 4" (102) 22" (559) AND 48" (1219) WIDTHS 30" (762), 36" (914), 42" (1067) OVERALL DEPTH 24" (610) DEEP WALL HOODS 12" (305) 18" (457) OVERALL HEIGHT 4" (102) 24" (610) 54" (1372), 60" (1524) AND 66" (1676) WIDTHS 30" (762), 36" (914), 42" (1067), 48" (1219) OVERALL DEPTH 27" (686) DEEP WALL HOODS 12" (305) 30" (762), 36" (914), 42" (1067), 48" (1219) 54" (1372), 60" (1524) AND 66" (1676) WIDTHS 27" (686) OVERALL DEPTH 18" (457) OVERALL HEIGHT 4" (102) Pro Wall Hood Specifications Installation Specifications LOW-PROFILE WALL HOODS E6" (152) 5" (127) LOCATION OF ELECTRICAL WIDTH OF HOOD 30" (762) TO 36" (914) TO COUNTERTOP 10" (254) HEIGHT OF HOOD 22" (559) DEPTH OF HOOD 24" AND 27" DEEP WALL HOODS E6" (152) 5" (127) LOCATION OF ELECTRICAL WIDTH OF HOOD 30" (762) TO 36" (914) TO COUNTERTOP 18" (457) HEIGHT OF HOOD 24" (610) OR 27" (686) DEPTH OF HOOD Pro Wall Hood Specifications wolfappliance.com/specs Electrical Requirements Wolf pro ventilation hoods require a separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply flush with back wall and within the shaded area shown in the illustration for your specific model on the previous page. IMPORTANT NOTE: You mus...

Otros modelos de este manual:
Los aficionados - 811504 (485.06 kb)
Los aficionados - Pro Wall (485.06 kb)
Los aficionados - Pro Wall (485.06 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría