above electric burners or 75 cm. above gas or mixed-fuel burners. (Fig. 3). Electrical connection Fig. 3 The hood has a power cord with moulded plug with earth connection to be connected to a wall outlet of 230 V. The power outlet should be pre-mounted in such a way that the power cord is invisible when the hood is fully mounted. The power cord length is 1,25 m. Min 65 cm Min 75 cm As it is then hard to disconnect the power plug for cleaning and service, an easy accessible two pole switch should

42 Mounting of grease filters .................................................................................................................................. 42 Function ............................................................................................................................................................... 42 Exhausting version ............................................................................................................................................. 42

32 Maintenance and care....................................................................................................................................... 33 Cleaning the hood .................................................................................................................................................. 33 Metal grease filter .................................................................................................................................................. 33

• When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation: — short and straight outlet hose — keep bends in outlet hose to a minimum — never install the hoses with an acute angle, they must always follow a gentle curve only — keep the hose as large as possible (preferably the same diameter as the outlet hole). • Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the extract

7 DL4150 - DL 6250 - CHDL 4150 Electrical connection (not for UK) Safety warnings for the electrician Before connecting the appliance to the power supply, check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the local electricity board.

Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks. Removing the metal grease filter DL 4150 - CHDL 4150 - DL 6250 • Press the handle that locks the grease filter first towards the opposite side and then extract downwards. Fig. 4. 570 D - 5708 D • Fold the handles downwards and press them towards the centre. Fig. 4. Grease filter Handle DL 4150 - CHDL 4150 DL 6250 Handle 570 D - 5708 D Fig. 4 Hand washing Soak grease filters for

7 570 D - 5708 D Fig. 7 DL4150 - DL 6250 - CHDL 4150 Electrical connection (not for UK) Safety warnings for the electrician Before connecting the appliance to the power supply, check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the loc