Votos - 2, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Videocámaras - HMX-E10ON (9.37 mb)
Videocámaras - HMX-E10ON (9.56 mb)
Resumen del manual
Low ambient temperature (below 10. C/50. F) may shorten its life-span and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder. • Charge an extra battery before using the camcorder outdoors. -The cold temperature may shorten the length of time you can use the battery before needing to recharge it. • Check whether the battery terminal is damaged if the battery falls or is dropped. -If you install a battery with the damaged terminal into the camcorder, you can damage the camcorder. • Throw away the dead battery into a recycling bin. • The battery lifetime is limited. -Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one. -Each battery’s life is affected by storage, operating, and environmental conditions. • A USB connection by itself can not operate the camcorder. You must install the battery. • If you use a USB charger, the charger should provide 500mA at a minimum of 5V and a maximum of 6V. Maintaining the battery • Make sure to store the battery separately after use. -A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off. -If the battery is installed and left in the camcorder for a long time, the battery discharges. If this occurs, you may not be able to use the battery, even if you charge it fully. -Keep the battery out of reach of children. -To store the battery for a long time, we recommend you keep the battery charged at about half of its full capacity and charge the battery once every 3 months. • Remove the battery and the memory card from the camcorder after use. -Store the battery in a stable, cool, and dry place. (Recommended temperature : 15C.~ 25C. (59.F ~ 77.), recommended humidity: 40%~ 60%) -Temperatures that are too high or too low shorten the battery lifetime. -The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty location. About the battery life • Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one. • When the battery reaches the end of its life, please contact your local Samsung dealer for a replacement. basic operation of the camcorder This camcorder provides one record mode for both video and photo recordings. You can easily record videos or photos in the same mode without having to switch modes. When the camcorder is turned on, the self-diagnosis function operates and a message may appear. If this occurs, refer to "Warning indicators and messages" (on pages 76~77) and take corrective action. • • This chapter introduces you to the basic operation procedures of this camcorder, such as turning the power on/off and switching modes. TURNING YOUR CAMCORDER ON/OFF You can turn the power on or off by pressing the Power ( ) button. When using this camcorder for the first time When you use your camcorder for the first time or reset it, the date and time set screen appears as the start-up display. Set the date and time. ..page 25 Power ( ) button SETTING THE OPERATING MODES You switch the operating mode in the following order each time you press the Mode ( ) button: Record mode - Play mode • You can choose the video or photo thumbnail view display options by touching the Video ( ) or Photo ( ) tab on the LCD screen. • When switching to play mode, you can enjoy landscape playback by rotating the camcorder from a vertical to a horizontal position. Play tab ( / ) Mode ( ) button MENU Mode Functions Record mode To record videos or photos. Play mode To play videos or photos. Easy one-handed recording and button operations. When switching to the play mode, you can enjoy a landscape playback by rotating the camcorder. Record mode Playback mode MENU MENU basic operation of the camcorder USING THE TOUCH PANEL The touch panel lets you play back and record with a simple touch of your finger. Hold the camcorder firmly in one hand to support it. Then, touch the items displayed on the screen. MENU Slightly touch the items or functions to select or execute with your finger. Drag the image left or right on the LCD screen to go to the previous or next file. Touch Drag MENU0:00:05/0:00:50 100-0001 01/JAN/2010 00:00 MENU20/33 01/JAN/2010 00:00 100–0001 • Do not place a protective film on the LCD screen. • If you leave a film attached to the LCD screen for a long time, strong adhesion between the film and the surface of the screen may cause the touch panel to malfunction. • Be careful not to accidentally press the buttons near the LCD panel while using the touch panel. • The tabs and indicators that appear on the LCD screen depend on the current recording/playback status of your camcorder. • The camcorder does not recognise touches if you touch more than two points on ...
Otros modelos de este manual:Videocámaras - HMX-E10BP (9.31 mb)
Videocámaras - HMX-E10OP (9.31 mb)
Videocámaras - HMX-E10WP (9.31 mb)