Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Open up the LCD screen 90° with your finger. 2. Rotate it to the best angle to record or play. Do not lift the HD camcorder by holding the LCD screen. WARNING • Over-rotation may cause damage to the inside of the hinge that connects the LCD screen to the HD camcorder. • See page 67 to adjust the brightness and contrast of the LCD screen. Using the touch panel You can play recorded images and set the functions by using the touch panel. Place your hand on the rear side of the LCD panel to support it. Then, touch the items displayed on the screen. • Be careful not to press the buttons nearby the LCD panel accidentally while using the touch panel. • The tabs and indicators that appear on the LCD panel depend on the recording/playback status of your HD camcorder at the time. • To avoid malfunction of the touch screen, please remove and discard the protection film from the screen before using. .... Language Demo A.Anynet+ (HDMI-CEC)5 / 5 English _23 preparation INITIAL SETTING: OSD LANGUAGE & DATE AND TIME To read the menus or messages in your desired language, set the OSD language. To store the date and time during recording, set the date/time. Selecting the OSD language You can select the desired language to display the menu screen and the messages. 1. Touch the Menu ( ) tab. 2. Touch the Settings ( ) tab. 3. Touch the up ( )/down ( ) tab until “Language” is displayed. 4. Touch “Language”, then touch the desired OSD language. 5. To exit, touch the Exit ( ) tab or Return ( ) tab repeatedly until menu disappears. • The OSD language is refreshed in the selected language. • Even if the battery pack or AC power are removed, the language setting will be preserved. • “Language” options may be changed without prior notice. STBY 00:00:00 [44Min] 80 Min Date/Time Set Date/Time File No. LCD Control 1 / 5 Language Demo A. 5 / 5 Anynet+ (HDMI-CEC) 24_ English Setting the date and time Set the date and time when using this HD camcorder for the first time. 1. Touch the Menu ( ) tab. 2. Touch the Settings ( ) tab. 3. Touch the up ( )/down ( ) tab until “Date/Time Set” is displayed. 4. Touch “Date/Time Set.” 5. Touch the up ( )/down ( ) tab to set current day, then touch month field. 6. Set values for month, year, hour, and minute as in setting the day. 7. Touch the OK ( OK) tab when the date and time setting is completed. • The message “Date/Time Changed” appears, the set date/time is applied. 8. To exit, Return ( ) tab repeatedly until menu disappears. • On charging the built-in rechargeable battery Your camcorder has a built-in rechargeable battery to retain the date, time, and other settings even when the power is off. The built- in rechargeable battery is always charged while your camcorder is connected to the wall outlet via the AC power adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 6 months if you do not use your camcorder at all. Use your camcorder after charging the built-in rechargeable battery. If the built-in rechargeable battery is not charged, any input data will not be backed up and the date/time appears on the screen as “01/ JAN/2007 00:00” (when “Date/Time” display is set to On). • You can set the year up to 2037. Turning the date and time display on/off To switch the date and time display on or off, access the menu and change the date/time display mode. .page 66 STBY 00:00:00 [44Min] 80 Min Date/Time Set Date/Time File No. LCD Control 1 / 5 OKDate/Time Set 01 00 JAN 00 2007 English _25 Memory Card 1 / 1 Memory Card 1 / 1 before recording SELECTING THE STORAGE MEDIA (VP-HMX10A/HMX10C/HMX10CN/HMX10ED only) You can record movie and photo images on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback. Using the built-in memory • This HD camcorder has an embedded memory that can be conveniently used to record or playback movie/photo images. • If you use the built-in memory to make a recording, touch the Menu ( ) tab . Storage ( or ) tab . “Memory.” Using a memory card (not supplied) Memory Card 1 / 1 • This HD camcorder has multi card-slot for access to SDHC (Secure Digital High Capacity) and MMCplus cards. • You can use SDHC and MMCplus cards on your HD camcorder. (Some cards are not compatible depending on the memory card manufacturer and memory card type.) • Before inserting or ejecting the memory card, turn the HD camcorder off. • If you use a memory card to make a record, touch the Menu ( ) tab • Storage ( or ) tab . “Card.” • Never format the built-in memory or memory card using a PC. • When you insert a memory card, play thumbnail mode or menu display mode, the storage media setup menu appears. Touch “Yes” if you want to use a memory card, or “No” if not. • Do not remove the power (battery pack or AC power adaptor) during accessing storage media such as recording, playback, format, delete, etc. The storage media and its data may be damaged. • Do not eject a memory card while it is...
Otros modelos de este manual:Videocámaras - VP-HMX10 (15.11 mb)
Videocámaras - VP-HMX10C (15.11 mb)
Videocámaras - VP-HMX10CN (15.11 mb)
Videocámaras - VP-HMX10ED (15.11 mb)