Votos - 4, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Canon FS22 |
Resumen del manual
CANNOT EDIT CHECK THE CARD -The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 32). CANNOT ENTER THE STANDBY MODE NOW -The camcorder cannot enter the standby mode if the remaining battery charge is too low. CANNOT PLAY BACK -There is a problem with the memory. CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY -There is a problem with the built-in memory. CANNOT PLAY BACK CHECK THE CARD -There is a problem with the memory card. CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE -The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this camcorder ( 32). CANNOT PLAY THE MOVIES ON THIS CARD -Movies cannot be played back from a memory card with a capacity of 64 MB or less. CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER -The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 32). CANNOT RECORD -There is a problem with the memory. CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY -There is a problem with the built-in memory. / / / / / / / / CAMCORDER / / CANNOT RECORD CHECK THE CARD -There is a problem with the memory card. CANNOT RECORD MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE -The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this camcorder ( 32). CANNOT RECORD MOVIES ON THIS CARD -Movies cannot be recorded on a memory card with a capacity of 64 MB or less. CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER -The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 32). CARD FULL -The memory card is full. Erase some recordings ( 43, 65) to free some space or replace the memory card. CARD REACHED THE MAXIMUM NUMBER OF SCENES -The memory card already contains 3,999 scenes (the maximum number of scenes); no further scenes can be copied onto the memory card. Delete some recordings ( 43) to free some space. CARD UNABLE TO RECOGNIZE THE DATA -The memory card contains scenes recorded in a different television system (PAL or SECAM). CHANGE THE BATTERY PACK -Battery pack is exhausted. Replace or charge the battery pack ( 19). CHECK THE CARD -Cannot access the memory card. Check the memory card and make sure it is inserted correctly ( 31). -A memory card error occurred. The camcorder cannot record or display the image. -If after the message disappears, appears in red, perform the following: Turn off the camcorder and remove and reinsert the memory card. If turns back to green you can resume recording/playback. -Initialize the memory card ( 32). (Doing so will erase all the recordings on the memory card.) CONNECT THE COMPACT POWER ADAPTER -When the camcorder is in mode and is connected to the computer, this message will appear if the camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder. COULD NOT ADD TO PLAYLIST -The playlist cannot contain more than 100 hours of scenes. CARD INITIALIZE USING ONLY THE CAMCORDER -There is a problem that prevents accessing the memory card. Initialize the memory card with this camcorder ( 32). LCD SCREEN HAS BEEN DIMMED -Hold DISP. pressed down for 2 seconds or more. MAY NOT BE POSSIBLE TO RECORD MOVIES ON THIS CARD -You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 2 or higher. / / CAMCORDER / / Additional Information NAMING ERROR -The folder and file numbers have reached their maximum value. Set [PHOTO NOS.] to [RESET] ( 90) and erase all the photos on the memory card or initialize it. NEED TO RECOVER FILES FROM THE CARD. CHANGE THE POSITION OF THE CARD'S LOCK SWITCH. -This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. NO CARD -There is no memory card in the camcorder. NO PHOTOS -There are no photos to play back. NO SCENES -There are no scenes recorded in the memory selected. NOT AVAILABLE IN DUAL SHOT -You pressed a button that cannot be used in mode. Turn the camera mode dial to a flexible recording mode ( or ). NOT ENOUGH AVAILABLE SPACE CANNOT DIVIDE THE SCENE -The scene could not be divided because there was not enough available space in the memory. Delete some scenes ( 43). PLAYLIST IS FULL. CANNOT DIVIDE THE SCENE. -Scene could not be divided. The playlist cannot contain more than 99 scenes. Delete some scenes ( 43). PRINT ORDER ERROR -You attempted to set more than 998 photos in the print order. PROCESS CANCELED -The process was canceled following user intervention. REACHED THE MAXIMUM NUMBER OF SCENES -The maximum number of scenes has been reached. Delete some scenes ( ...
Otros modelos de este manual:Videocámaras - FS20 (5.52 mb)
Videocámaras - FS200 (5.52 mb)
Videocámaras - FS21 (5.52 mb)