4 Press (5) button to select SP (standard play, for the best picture quality) or EP (extended play, for the longest recording time on a single tape). • An indicator on the VCR's display shows which speed is selected. 5 Press the CH ( / ) button or the number buttons to select the channel you want to record. Example: Select channel 8. • 100/ENT and (2) and (4) for channel 124. 6 Press the REC button on the remote control or the REC/IRT button on the VCR. Recording will start and the REC indicator

Important: Your timed recording settings take effect when you turn off the power on the VCR. C_u_ion6f Aft e_en'_e_i_g _ PI_Cod_ _rrl6_re_ _ tH_i_f_i-m _tio_di_y_d_it_ _he I_P_O_ RAM RE_I EW if there i Using the VCR Plus+ system to record a program (by using the VCWs display) You can use the VCR Plus+ system to program the timer, observing the VCR's display, without turning on the power to the VCR and TV. Remote Control Illustration 1 Insert a blank or eraseable tape. The power comes on automati

Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or Cable (No Cable Box) Setup (Hookups [A], [B], [C] or [D].) 1 Turn on the TV and select the Video channel (3 or 4). Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO. 2 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 3 Press the (4) button to select CHANNEL PRESET. 4 Press the (4) button to select VCR PLUS+ SETUP. A small arrow points to a blank "--" in the CHANNEL co

Make sure that STEREO/MONO selection is set to STEREO. When this is set, the VCR records the second audio program. Using the Instant Recording Timer (IRT) The Instant Recording Timer (RECIIRT button on the VCR) will let you make a simplified timer recording without having to use the programming timer. In order to set the IRT properly the clock must be set before starting. Follow the steps 1 through 5 on "Basic Recording Steps" on page 37. After the recording has started, press the REC/IRT button

Removing Channels You may not want to keep all the stations the auto-programmer selects, since you may prefer to have only a few favorite channels in the tuner's memory. Or, you may want to delete from memory a weak or unused channel that the tuner picked up. Erased channels cannot be selected by the up and down CHANNEL buttons but can still be selected by using the numbered buttons 0 to 9 and 100/E NT. Adding Channels Occasionally the auto-programming may skip an active channel because the ante

*VCR Plus+C. and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. Auto Set Up system automatically tune in broadcast channels. S-VHS Quasi playback allows you to playback the tape that is recorded by S-VHS type. Super index allows you to quickly search for a program you want to view or the point from which you want to start recording on tape. Super rewind and fast forward. Multi-channel

If any are missing or appear damaged, consult your dealer. Remote Control Cable for connecting Batteries for remote this VCR to a TV control handset (R6) VCR Customer Controls Item No. Function 21 22 23 AUDIO IN L, R jacks VIDEO IN jack IN FROM ANT. -signal input 24 OUT TO TV - signal out to TV 25 VIDEO OUT jack 26 AUDIO OUT L, R jacks Remote Control Customer Controls Item No. Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Transmission window POWER button CH (channel up/down) button VOL b

To copy from one VCR to another VCR 1 Press the AVX button on the remote control of VCR-1 so that L1 (line) appears in the display. 2 Press the REC, then PAUSE buttons on VCR-1. The VCR will go into Record/Pause. 3 Press the PLAY button on VCR-2. You will see the taped program being played on the TV. 4 When you see the part of the program you wish to record, press the PAUSE button on VCR-1 again to release pause and start recording. . Press the STOP button to finish recording. PROBLEM GUIDE / MA

Press either the or buttons until picture is clear. SPECIAL PLAYBACK EFFECTS Variable speed playback Still Playback (Pause) Press the PAUSE button on the remote control or PLAY/STILL on the VCR to still the tape during play. The picture will "freeze". You may see some minor noise or interference on the screen. This is normal. • To resume play, press the PLAY button or PAUSE button again. Note: The sound is muted and cannot be heard during "Special Playback Effects". Notes: • After 1 minute in th

• If you make a mistake when entering digits, press the CLEAR button repeatedly to display "-" for the incorrect digit, then reenter the correct digit. 6 Enter the start time by pressing (0), (6), (0) and (0) for 6:00. Remote Control Illustration. 7 Press the (2) button for PM. 8 Enter the end time by pressing (0), (6), (3) and (0) for 6:30. The VCR automatically selects PM for you. 9 Enter the recording date by pressing (0), (7), (1) and (0) for 7/10/98. Remote Control Illustration. 10 Press th