808-836-3621 TABLE OF CONTENTS FOR YOUR SAFETY..................................................................................................................3 IMPORTANT SAFEGUARDS.....................................................................................................4 CUSTOMER CONTROLS ..........................................................................................................7 VCR Customer Controls ...................................................................

Removing Channels You may not want to keep all the stations the auto-programmer selects, since you may prefer to have only a few favorite channels in the tuner's memory. Or, you may want to delete from memory a weak or unused channel that the tuner picked up. Erased channels cannot be selected by the up and down CHANNEL buttons but can still be selected by using the numbered buttons 0 to 9 and 100/E NT. Adding Channels Occasionally the auto-programming may skip an active channel because the ante

Make sure that STEREO/MONO selection is set to STEREO. When this is set, the VCR records the second audio program. Using the Instant Recording Timer (IRT) The Instant Recording Timer (RECIIRT button on the VCR) will let you make a simplified timer recording without having to use the programming timer. In order to set the IRT properly the clock must be set before starting. Follow the steps 1 through 5 on "Basic Recording Steps" on page 37. After the recording has started, press the REC/IRT button

one hour. However, programmed delayed recordings will have been cleared and must be reset. Does not record Safety tab removed from Put cellophane tape over the when you press the videocassette? tab area, or use a videocas- REC. sette with the safety tab intact. TV program Loose or inappropriate Review hookup directions cannot be connections between VCR and make correct, firm con- viewed or and TV? nections. recorded. Problem Things to Check Solution Poor picture TV channel selector on the Set TV

6 IMPORTANT SAFEGUARDS .............................................................................. 7 CUSTOMER CONTROLS.................................................................................. 11 VCR Customer Controls ................................................................................. 11 VCR Customer Controls ................................................................................. 12 Remote Control Customer Controls...............................................

You set up the delayed recording using the on-screen Easy Guide System. 1. Press GUIDE, then press 1 to select VCR PLUS RECORDING and bring up this screen: 2. Use the number buttons to enter the PlusCode of the program you want to record. This code can be up to eight digits. If you enter a wrong digit, press CLEAR and enter the correct one. 3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error message that disappears from the screen in about 10 seconds. 4. If you have e

You need to select the appropriate channel. • When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the VCR. The POWER indicator will light up and the VCR indicator will flash. Press the CHANNEL A button alternates between channel 3 and channel 4. The VCR will stop flash. If within 30 seconds, the CHANNEL A button not been press, the VCR will terminate the selection of RF Channel. ADVANCED CABLE HOOKUP -WITH CABLE BOX [F] WITH THIS HOOKUP_ YOU C

770-279-5600 Quebec, H9R 1B1, CANADA Tel. 514-697-9150 HITACHI SALES CORPORATION OF HAWAII, INC 3219 Koapaka Street, Honolulu, Hawaii 96819 Tel. 808-836-3621 QR15334 ©Hitachi, Ltd. 1996 Printed in Hong Kong TABLE OF CONTENT IMPORTANT SAFEGUARDS................................................................................................................. 4 PRECAUTIONS.................................................................................................................................