Votos - 4, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 1.67 mb Nombre del archivo: Idioma del manual:

LET THE UNIT STAND WITH POWER ON (SEE BELOW). WHAT IS MOISTURE CONDENSATION? When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the glass. This is called moisture condensation. MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES; • When you move the unit from a cold to a warm place. • After heating a cold room or under extremely humid conditions. WHEN YOU EXPERIENCE THE ABOVE CONDITIONS, Plug the power cord into an AC outlet, press the POWER button to turn on and leave the unit at room temperature until moisture condensation disappears. Depending on the surrounding conditions, this may take three hours. Video Tape Head Drum Avoid extreme moisture and dust. The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid covering the holes with soft materials such as cloth or paper. If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the wall outlet, wait a few minutes and plug it back in. The unit should return to normal operation. Avoid extreme heat. Avoid extreme cold. Do not place the unit on or near appliances which may cause electromagnetic interference (e.g. speakers, etc). Doing so may cause erratic operation of the unit including picture and/or sound distortion or noise. (5°C) 41°F 104°F (40°C) ENGLISH Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. Avoid places subject to strong vibration. Use in a horizontal (flat) position only. Keep the unit away from flower vases, sinks, etc. If liquids should be spilled into the unit, serious damage will result. If you spill any liquids into the unit, unplug the AC power cord immediately and consult qualified service personnel before attempting to use it again. When you finish operating the unit, always unload the cassette and turn off the power. Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. Avoid places subject to strong vibration. Use in a horizontal (flat) position only. Keep the unit away from flower vases, sinks, etc. If liquids should be spilled into the unit, serious damage will result. If you spill any liquids into the unit, unplug the AC power cord immediately and consult qualified service personnel before attempting to use it again. When you finish operating the unit, always unload the cassette and turn off the power. When you leave your home for a long time, unplug To protect the unit from a lightning storm, unplug the the AC power cord. AC power cord from the wall outlet and disconnect the antenna. POWER SOURCE TO USE AC POWER Use the AC polarized line cord provided for operation on AC. Insert AC Outlet Wider Hole the AC cord plug into a standard 120V 60Hz polarized AC outlet. NOTES: • Never connect the AC line cord plug to anything other than the specified voltage (120V 60Hz). Use the attached power cord only. • If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user's responsibility to have an electrician replace the obsolete outlet. • If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in. The unit should return to normal operation. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing the POWER button. 7 and Blade Polarized AC Cord Plug(One blade is wider than the other) LOCATION OF CONTROLS FRONT REAR (MV13N2C) ANT. 16 15 234 56 7 VOLUMERECPOWERCHANNELPLAYREWFFSTOP/EJECTRECTIMERRECVIDEOAUDIOLINEINPHONE 8 9 10 11 12 13 14 DESCRIPTION OF CONTROLS FRONT: 1. Cassette Loading Slot -To insert or remove a video tape. 2. POWER Button - Press to turn the TV/VCR on or off. 3. TIMER REC Indicator -Lights when the unit is in the Timer Record Mode. 4. REC Indicator - Lights up when the TV/VCR is recording. 5. PLAY Button - Press to play a prerecorded tape. 6. REW (Rewind) Button - In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search. 7. PHONE Jack -Plug monaural headphones or an earphone with an 1/8" miniplug into this jack for private listening. 8. Remote Sensor -Signals from the Remote Control are received here. 9. REC Button - Press once to start normal recording. Additional presses activate One-touch Timer Recording. 10. VOLUME / Buttons - Press to raise or lower the volume of the sound. 11. CHANNEL / Buttons -Press to select a channel for viewing or recording. 12. STOP/EJECT Button -Press once to stop the tape in any mode. Press again to eject the tape. 13. FF (Fast Forward) Button - In the Stop mode, this button rapidly winds the tape forward. In the Play mode, this button activates ...

Descargar ahora

Introduzca dos números de la imagen: