Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SX717E (1.29 mb)
VCR / vídeo - SLV-SX717E (1.23 mb)
Resumen del manual
These signals ensure that your timer recordings are made regardless of broadcast delays, early starts, or broadcast interruptions (when the VPS or PDC indicator in the display window is lit). To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can also use the VPS/PDC function for a source connected to one or more of the LINE inputs. To record satellite broadcasts If you connect a satellite tuner and the VCR, you can record satellite programmes. 1 Turn on the satellite tuner. 2 On the satellite tuner, select the satellite programme for which you want to make a timer setting. 3 Follow steps 1 through 6 above. 4 Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting. continued Basic Operations Recording TV programmes using the ShowView system (not available on SLV-SE610A/E) To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 43). • Display tape information on the TV screen (page 45). • Check the timer settings (page 66). • Watch another TV programme (page 46). Tips • To set the programme position, you can also use the PROG +/– or programme number buttons. • To set the programme position with a two digit number, press -(ten’s digit) button followed by the programme number buttons. • To set the line input video source, you can also use the PROG +/– buttons. • To set the tape speed, you can also use the SP/LP button. • When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1 menu (page 82). • To check, change, or cancel the programme setting, press Otros modelos de este manual:
VCR / vídeo - SLV-SE610A (1.21 mb)
VCR / vídeo - SLV-SE610E (1.21 mb)
VCR / vídeo - SLV-SE710D (1.21 mb)
VCR / vídeo - SLV-SE710E (1.21 mb)