Votos - 3, Puntuación media: 4.7
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SX810D (1.29 mb)
VCR / vídeo - SLV-SX810D (1.23 mb)
Resumen del manual
• OFF to turn on the indicators in the display window while the VCR is standing by. Changing menu options Menu option Set this option to POWER SAVE*6 • ON to turn off the indicators in the display window during standby mode to reduce the VCR’spower consumption to a minimum. • OFF to turn on the indicators in the display window while the VCR is standing by. TV DIRECT REC*4 • ON to activate the TV Direct Rec function. • OFF to deactivate it. RR • NORMAL for normal everyday use. • HIGH for well-used video tapes such as rented tapes. Select this option when NORMAL does not improve the picture quality. • OFF to switch off the RR function. Notes • When the VCR stands by for recording, the indicators in the display window remain lit even when POWER SAVE is set to FULL, PARTIAL, or ON. • With the EDIT option ON, the OPC function does not work. *1 SLV-SE610E, SE710E, SX710E, and SE810E only *2 SLV-SE610E, SE710D/E, SX710D/E, and SX717D/E only *3 SLV-SE810D/E and SX810D only *4 not available on SLV-SE610A/E *5 not available on SLV-SE610A *6 SLV-SE610A only Additional Operations Changing menu options Editing ConnectingtoaVCRorstereosystem How to connect to record on this VCR Connect the line outputs of the other VCR to the LINE IN connector or jacks of this VCR. Refer to the examples A through C and choose the connection that best suits your VCR. Example A Your VCR (Recorder) TV i LINE-1 (TV) VMC-2121HG Scart cable (not supplied) Scart (EURO-AV) Other VCR (Player) : Signal flow Example B Your VCR (Recorder) TV VMC-820HG audio/video cable (not supplied) LINE OUT Other VCR (Player) : Signal flow t LINE-2 L o R*1 (open cover to connect) Connecting to a VCR or stereo system Example C Your VCR (Recorder) TV DECODER/ t LINE-3 IN*1 or DECODER/ t LINE-2 IN*2 VMC-2121HG Scart cable (not supplied) Scart (EURO-AV) Other VCR (Player) : Signal flow How to connect to a stereo system (SLV-SE810D/E and SX810D only) Connect the t LINE-2 L o R jacks on this VCR to the audio output jacks on the stereo system, using the RK-C510HG audio cable (not supplied). Notes • Make sure you connect the plugs to jacks of the same colour.*1 • If the other VCR is a monaural type, leave the red plugs unconnected. • If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise. • If the other VCR does not have a Scart (EURO-AV) connector, use the VMC2106HG cable instead and connect the cable to the line out jacks of the other VCR. • When you connect another VCR to the DECODER/LINE-3 IN*1 (or DECODER/ LINE-2 IN*2) connector, set DECODER/LINE3*1 (or DECODER/LINE2*2)to LINE3*1 (or LINE2*2) in the OPTIONS-2 menu. *1 SLV-SE810D/E and SX810D only *2 SLV-SE610E, SE710D/E, SX710D/E, and SX717D/E only Editing Connecting to a VCR or stereo system Basic editing when recording on this VCR Before you start editing • Turn on your TV and set it to the video channel. • Press INPUT SELECT to display the connected line in the display window. • Press SP/LP to select the tape speed, SP or LP. • On this VCR, set EDIT to ON in the OPTIONS-1 menu. If the other VCR has a similar function, turn it on as well. 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause). 3 Press z REConthis VCR to set it torecordingpause. 4 To start editing, press the X (pause) buttons on both VCRs at the same time. To stop editing Press the x (stop) buttons on both VCRs. Tip • To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording. Note • If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z REC again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled. XzREC Basic editing Audio dubbing (SLV-SE810D/E and SX810D only) This feature lets you record over the AUDIO DUB normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder. t LINE-2 L o R X Before you start... • Open the t LINE-2 L o R jacks cover on the front panel and connect a playback source. • Turn on the TV and set it to the video channel. 1 Insert a source tape into your stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause. 2 Insert a prerecorded tape with its safety tab in place into this (recording) VCR. Search for the start of the section to be replaced and press X (pause)...
Otros modelos de este manual:VCR / vídeo - SLV-SE610A (1.21 mb)
VCR / vídeo - SLV-SE610E (1.21 mb)
VCR / vídeo - SLV-SE710D (1.21 mb)
VCR / vídeo - SLV-SE710E (1.21 mb)