Votos - 6, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1 2 3 4 5 6 7 8 9 0 Getting Started 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 qs ?/1 (on/standby) switch (43) qd •TV/VIDEO remote control switch (11) qf AUDIO MONITOR button*1*2 (49) qg DISPLAY button (31) (33) qh PROG (programme) +/– buttons*1 (34) qj y SLOW button (45) qk .2 button (45) ql ./> INDEX SEARCH buttons (50) *1 The H PLAY, AUDIO MONITOR, number 5 and PROG + buttons have a tactile dot. *2 SLV-ED828ME/SG only Getting Started Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR: • Remote commander • Aerial cable • R6 (size AA) batteries • Plug adaptor (SLV-ED828ME and ED323ME only) Check your model name The instructions in this manual are for the 4 models: SLV-ED828ME/SG and ED323ME/SG. Check your model name by looking at the rear panel of your VCR. SLV-ED828ME is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-ED828ME only.” Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your Sony TV. If the TV does not have the symbol near the remote 1 2 3 4 5 6 7 8 9 0 •TV/VIDEO sensor, this remote commander will not operate the TV. Getting Started To operate Set •TV/VIDEO to the VCR VIDEO and point at the remote sensor at the VCR a Sony TV •TV and point at the remote sensor at the TV continued Getting Started Step 2 : Setting up the remote commander (continued) Notes • With normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery together with an old one. • Do not use different types of batteries together. • Some buttons may not work with certain Sony TVs. Getting Started Step 3 : Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound. Connecting the aerial Getting Started Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. Connect of the VCR and the aerial input of your TV using the supplied aerial cable. Connect the mains lead to the mains. Note • When you connect the VCR and your TV only with an aerial cable, you have to tune your TV to the VCR (see page 15). continued Getting Started Step 3 : Connecting the VCR (continued) Additional connections For SLV-ED828ME/SG To a TV that has audio/ video input jacks This additional connection improves picture and sound quality. Connect the TV as shown on the left. LINE OUT LINE IN Audio/video cable (not supplied) For SLV-ED323ME/SG LINE OUT LINE IN Audio/video cable (not supplied) To a stereo system (SLV-ED828ME/SG only) You can improve sound quality by connecting a stereo system to the LINE OUT AUDIO R/L jacks as shown on the left. LINE OUT AUDIO R/L LINE IN Audio cable (not supplied) Note • To play a tape in stereo, you must connect your VCR either to a TV with audio/ video input jacks or to a stereo system as shown on above left. Getting Started Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display and TV channels automatically. Getting Started Turn on your TV and set it to the video channel. Tune the TV to channel 32 (the initial RF channel for this VCR). Refer to your TV manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF channel” on page 17. OK PLAY Connect the mains lead to the mains. The VCR automatically turns on. ENGLISH ARABIC The LANGUAGE SET menu appears on the TV screen. Press Otros modelos de este manual:
VCR / vídeo - SLV-ED323ME (1.09 mb)
VCR / vídeo - SLV-ED323SG (1.09 mb)
VCR / vídeo - SLV-ED828ME (1.09 mb)