Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Do not use a commercially available liquid type cleaning cassette other than Sony’s, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony service facility for more information. The picture has no colour. • The COLOUR SYSTEM option in the USER SET menu is set to the wrong position. Set the option to conform to the system that the tape was recorded in. The picture rolls vertically • Adjust the vertical hold control on the TV or monitor. during picture search. Additional Information Symptom Remedy Recording Playback The picture has no sound. • The tape is defective. • If you made A/V connections, check the audio cable connection. • If you made connections using the aerial cable only, make sure the TV system is set correctly for your area. The sound from a tape • Adjust the tracking. recorded with the VCR is not • The video heads are dirty. Clean the video heads in stereo or the STEREO using the Sony T-25CLD, E-25CLDR, or T-25CLW indicator in the display video head cleaning cassette as explained above. window is flashing. No TV programme appears on the TV screen. • Make sure the TV is set to the video channel. If you are using a monitor, set it to video input. • Existing broadcasts may interfere with the VCR. Reset the RF channel output of your VCR (see page 17). • Select the correct source with the INPUT SELECT button. Select a programme position when recording TV programmes; select a line input when recording from other equipment. TV reception is poor. • Make sure the aerial cable is connected securely. • Adjust the TV aerial. • Make sure the TV system is correctly set for your TV. • Make sure TV SYSTEM (B/G, D/K or I) in the INSTALLATION menu is set to the same system in your local area. Additional Information The recorded picture has no • Set COLOUR SYSTEM in the USER SET menu colour or unusual colour. according to your local colour system. The tape starts playing as • The safety tab has been removed. To record on this soon as it is inserted. tape, cover the tab hole (see page 34). The tape is ejected when you • The safety tab has been removed. To record on this press zREC. tape, cover the tab hole (see page 34). Nothing happens when you • Make sure the tape is not at its end. press zREC. continued Additional Information Troubleshooting (continued) Symptom Remedy The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. rding • Make sure the tape is not at its end. Timer reco• Make sure a programme has been set for timer recording. • Make sure your timer settings are past the current time. • The clock stops if the VCR is disconnected from the mains. Reset the clock and timer. • Turn the power off and unplug the mains lead. A tape cannot be inserted. • Check that a tape is not already in the tape compartment. The remote commander does not function. • Make sure you are pointing the remote commander at the remote sensor on the VCR. • Replace all the batteries in the remote commander with new ones if they are weak. • Make sure the •TV/VIDEO remote control switch is set correctly. OthersThe selected input line connector number does not • Press INPUT SELECT to display the connected line. appear in the display window. The tracking meter does not • The recording condition of the tape is very poor and appear on the TV screen. tracking cannot be adjusted. The display window becomes • The display window automatically becomes dim dim. when the VCR is in standby mode. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. Additional Information Symptoms caused by contaminated video heads • No picture (or • Unclear picture • Rough picture • Normal picture black & white screen appears) terminal initial contamination Additional Information Additional Information Specifications System Colour system PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41 D/K: VHF R1 to R12/UHF R21 to R69 I: VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41 RF output signal UHF channels 21 to 69 (B/G, D/K, I) Aerial out 75-ohm asymmetrical aerial socket Tape speed SP: PAL 23.39 mm/s (recording/ playback) NTSC 33.35 mm/s (recording (Line input only)/playback) LP: PAL 11.70 mm/s (recording/ playback) NTSC 16.67 mm/s (playback only) EP: NTSC 11.12 mm/s (recording (Line input only)/playback) Maximum recording/playback time 10 hrs. in LP mode (with E300 tape) Rewind time Approx. 1 min. (with E180 tape) Inputs and outputs LINE IN 1/LINE-2 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms Input impedance: more than 47 kilohms General Power requirements 110 – 240 V AC, 50/60 Hz Power c...
Otros modelos de este manual:VCR / vídeo - SLV-ED323ME (1.09 mb)
VCR / vídeo - SLV-ED323SG (1.09 mb)
VCR / vídeo - SLV-ED828SG (1.09 mb)