Votos - 4, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SE640E (828.74 kb)
VCR / vídeo - SLV-SE640E (829.92 kb)
Resumen del manual
Before you start… • Refer to “Index to parts and controls” for button locations. 1 While recording, press z REC. The indicator appears in the display window. 2 Press z REC repeatedly to set the duration time. In SP mode Each press advances the time in increments of 30 minutes. 0:30 1:00 4:00 4:30 Normal recording In LP mode Each press advan0:30 ces the ti1:00 8:00 me as shown 9:00 below. Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to the normal recording mode. To stop recording To stop the VCR while recording, press x (stop). Note • You cannot display the current tape time in the display window when setting the recording duration time. Additional Operations Setting the recording duration time Synchronized Recording (not available on SLV-SE640D/E and SE240D) You can set the VCR to automatically record programmes from equipment such as a satellite tuner by connecting the equipment to the LINE-3 (DEC/ EXT)*1 (or LINE-2 (DEC/EXT)*2) connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from LINE-3 (DEC/EXT)*1 (or LINE2 (DEC/EXT)*2). How to connect for Synchronized Recording Connect the LINE-3 (DEC/EXT)*1 (or LINE-2 (DEC/EXT)*2) connector of the VCR to the TV Scart connector of the satellite tuner. Then connect the LINE-1 (EURO AV) connector to the TV. Scart cable (not supplied) LINE-3 (DEC/EXT)*1 or LINE-2 (DEC/EXT)*2 LINE-1 (EURO AV) TV Scart connector Satellite tuner, etc. Scart cable (not supplied) Scart (EURO-AV) : Signal flow Synchronized Recording (not available on SLV-SE640D/E and SE240D) Recording programmes using SYNCHRO REC button/indicator the Synchronized Recording function Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Refer to “Index to parts and controls” for button locations. 1 Press INPUT SELECT or PROG +/– to display “L3*1 (or L2*2)” in the display window. 2 Set the timer on the connected equipment to the time of the programme you want to record, then turn it off. 3 Press SP/LP to select the tape speed. 4 Hold down SYNCHRO REC on the VCR for more than two seconds. The SYNCHRO REC indicator lights up in red and the VCR stands by for recording. The VCR automatically turns on and starts recording when it receives an input signal from the connected equipment. The VCR automatically stops recording when the tape reaches the end or when the connected equipment stops transmitting an input signal. To cancel the Synchronized Recording function Press SYNCHRO REC on the VCR. The SYNCHRO REC indicator disappears. To stop recording Press x (stop) while recording. Notes • This function may not work with some types of satellite tuners. • Some TVs or other equipment with timer functions will automatically turn off if no operation is performed within a certain amount of time. In this case, the Synchronized Recording also stops automatically. • When the connected equipment turns on while the SYNCHRO REC indicator lights up in red, recording starts automatically. • If the settings for timer recording and Synchronized Recording overlap, the programme that starts first has priority and the second programme starts recording only after the first programme has finished. • The Auto Clock Set function does not work while the VCR stands by for Synchronized Recording. *1 SLV-SE840D/E *2 SLV-SE747E, SE740D/E and SX740D/E Additional Operations Synchronized Recording (not available on SLV-SE640D/E and SE240D) Checking/changing/cancelling timer settings Before you start… • Turn on your TV and set it to the video channel. • Refer to “Index to parts and controls” for button locations. 1 Press ?/1 to turn on the VCR. 2 Press MENU, then press M/m to highlight TIMER PROGRAMMING and press OK. • If you want to change or cancel a PR DAY START STOP V/P setting, go on to the next step. 35 SA29 19 :00 20:00 SP ON 29 SA29 21 :00 21 :30 – – 30 SA 6 12 :00 • If you do not need to change or cancel 13 :30– – the settings, press MENU, then turn –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – off the VCR to return to recording –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – standby. –– –––– –– :–– –– :–– – – SELECT : SET : END : OK EXIT : MENU 3 Press M/m to select the setting you want to change or cancel, then press ,. PR DAY START STOP V/P 35 SA2919002 0:00 SP ON : 29 SA2921002 1 :30 – – The PR number on the selected row 30 SA : : 3:30 612001 –– –– –––– –– :–– –– :–– – – flashes. –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – SELECT : SET : END : OK EXIT : MENU 4 • To change the setting, press Otros modelos de este manual:
VCR / vídeo - SLV-SE240D (811.81 kb)
VCR / vídeo - SLV-SE640D (811.79 kb)
VCR / vídeo - SLV-SE740D (811.79 kb)
VCR / vídeo - SLV-SE740E (811.79 kb)