Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SE840D (828.74 kb)
VCR / vídeo - SLV-SE840D (829.92 kb)
Resumen del manual
You can also do the following tasks while the VCR is recording: • Reset the counter (page 39). • Display tape information on the TV screen (page 42). • Check the timer settings (page 62). • Watch another TV programme (page 42). continued Recording TV programmes using the Dial Timer (SLV-SE840D/E only) To set the clock 1 Hold down DIAL TIMER so that “DAY” appears in the display window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the day. 3 Press DIAL TIMER. “MONTH” appears in the display window. 4 Turn and press DIAL TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window again. 5 Turn and press DIAL TIMER to set the hour and minute. 6 When you have finished setting the time, press DIAL TIMER to start the clock. Tips • To cancel a Dial Timer setting, press x (stop) on the VCR while you are making the setting. • The programme is recorded in the current tape speed mode. To change the tape speed, press SP/LP before you complete the setting in step 9. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 62. Notes • If eight programmes have already been set using the ShowView system or the TIMER PROGRAMMING menu, “FULL” appears in the display window for about five seconds. • The and indicators flash in the display window when you complete the setting in step 9 with no tape inserted. • If you set the clock using the Auto Clock Set function and AUTO CLOCK is set to ON, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set correctly. • When the time is set incorrectly, “ERROR” appears in the display window in step 9. Set the timer again from step 1. • You cannot set the tape speed to AUTO using the Dial Timer. To select AUTO, set the tape speed in the TIMER PROGRAMMING menu (see page 62). Recording TV programmes using the Dial Timer (SLV-SE840D/E only) About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the “FULL” notice which appears if eight programmes have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X (pause) on the VCR while turning the DIAL TIMER. “DEMO” appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the mains lead (see page 62). Basic Operations Recording TV programmes using the Dial Timer (SLV-SE840D/E only) Recording TV programmes using the ShowView® system (not available on SLVSE640D/ E and SE240D) The ShowView system is the feature that simplifies programming the VCR to make timer recordings. Just enter the ShowView number listed in the TV programme guide. The date, times, and programme position of that programme are set automatically. You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Turn on your TV and set it to the video channel. • Set TIMER METHOD to SHOWVIEW or VARIABLE in the EASY OPERATION menu (see page 72). • Refer to “Index to parts and controls” for button locations. 1 TIMER OK Press TIMER. • When you set TIMER METHOD to VARIABLE: The TIMER METHOD menu appears on the TV screen. Press M/m to select SHOWVIEW, then press OK. • When you set TIMER METHOD to SHOWVIEW: The SHOWVIEW menu appears on the TV screen. : OKSET SELECT TIMER METHOD STANDARD SHOWVIEW : EXIT : MENU : OKSET CODE 0 – 9 SHOWVIEW CODE ––––––––– : EXIT : MENU Recording TV programmes using the ShowView® system (not available on SLV-SE640D/E and SE240D) 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 Press the programme number 2 buttons to enter the ShowView number. If you make a mistake, press CLEAR and re-enter the correct number. SHOWVIEW CODE 1234––––– CODE :0–9 SET : OK EXIT : MENU CLEAR OK Press OK. PR DAY START STOP V/P The date, start and stop times, 35 SA29 19 :00 20:00 SP – –– –––– –– :–– –– :–– – – programme position, tape speed and –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – VPS/PDC setting appear on the TV –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – screen. –– –––– –– :–– –– :–– – – INPUT SELECT –– –––– –– :–– –– :–– – – • If “– –” appears in the “PR” SELECT : SET : END : OK E...
Otros modelos de este manual:VCR / vídeo - SLV-SE240D (811.81 kb)
VCR / vídeo - SLV-SE640D (811.79 kb)
VCR / vídeo - SLV-SE640E (811.79 kb)
VCR / vídeo - SLV-SE740D (811.79 kb)