Votos - 3, Puntuación media: 3.3
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SE747E (828.74 kb)
VCR / vídeo - SLV-SE747E (829.92 kb)
Resumen del manual
TV STATION TABLE 2 1 PR CH 0 0 2 2 9 7 L A M A N B – – NAME OFF OFF DEC 3 0 3 0 CDE– OFF 4 0 3 2 I J K– OFF 5 0 3 3 – – – – OFF SWAPPING : OK DELETE : CLEAR EXIT : MENU 3 OK Press M/m to highlight the row which you want to set for the decoder, then press ,. To display positions 6 to 80, press M/m repeatedly. MANUAL TUNING PR CH MFT : : : 5 0 3 3 – DECODER : OFF NAME : – – – – SELECT : SET : END : OK EXIT : MENU 4 OK Press M/m to highlight DECODER. MANUAL TUNING PR : 5 CH : 0 3 3 MFT DECODER NAME : : : – OFF – – – – SELECT : SET : END : OK EXIT : MENU 5 OK Press , to set DECODER to ON, then press OK. MANUAL TUNING PR : 5 CH : 0 3 3 MFT DECODER NAME : : : – ON – – – – SELECT : SET : END : OK EXIT : MENU Setting the PAY-TV/Canal Plus decoder Press MENU to exit the menu. MENU Notes • To superimpose subtitles while watching PAY-TV/Canal Plus programmes, make both decoder-VCR and VCR-TV connections using 21-pin Scart cables that are compatible with the RGB signals. You cannot record subtitles on the VCR. • When you watch PAY-TV/Canal Plus programmes through the RFU input of the TV, press t TV/VIDEO so that the VIDEO indicator appears in the display window. *1 SLV-SE840D/E *2 SLV-SE747E, SE740D/E, SX740D/E, SE640D/E and SE240D Getting Started Setting the PAY-TV/Canal Plus decoder 37 Basic Operations Playing a tape Before you start... • Refer to “Index to parts and controls” for button locations. Turn on your TV and set it to the video channel. 1 Insert a tape. 2 The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 OK Press H (play). When the tape reaches the end, it will rewind automatically. Additional tasks To Do this Stop play Press x (stop) Pause play Press X (pause) Resume play after pause Press X (pause) or H (play) Fast-forward the tape Press M (fast-forward) during stop Rewind the tape Press m (rewind) during stop Eject the tape Press Z (eject) Playing a tape Using Playback Dial on the Playback Dial VCR With Playback Dial, you can operate the following playback options. To Do this Resume play after pause Press H (play) Fast-forward the tape Quickly turn and release Playback Dial to the right (M (fast-forward)) during stop Rewind the tape Quickly turn and release Playback Dial to the left (m (rewind)) during stop Note • Do not turn Playback Dial forcibly. It may damage Playback Dial. To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00” or “00:00.” Search for the point afterwards by referring to the counter. SE840D/E, SE747E, SE740D/E, SX740D/E SE640D/E, SE240D Basic Operations Hour Minute Hour Minute Second To display the counter on the TV screen, press DISPLAY. Notes • The counter resets to “0:00:00” or “00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – The picture becomes black and white. – The picture shakes. – No picture appears on the TV screen. – Black streaks appear horizontally on the TV screen. – The colour density increases or decreases. • Tapes recorded in the LP mode cannot be played back on SLV-SE240D. • While setting the menu on the TV screen, buttons for playback on the remote commander do not function. continued Playing a tape Starting playback automatically with one button (One Touch Play) (not available on SLV-SE640D/E and SE240D) If you use the SMARTLINK connection, you can turn on the TV, set the TV to the video channel, and start playback automatically with one button. 1 Insert a tape. The VCR automatically turns on. If you insert a tape with its safety tab removed, the TV turns on and switches to the video channel. Playback starts automatically. 2 Press H (play). The TV turns on and switches to the video channel automatically. Playback starts. Tip • When there already is a tape in the VCR, press ?/1 to turn on the VCR first. When you press H (play), the TV turns on, the TV is set to the video channel, and playback starts automatically in one sequence. Note • When you use the One Touch Play function, leave the TV on or in the standby mode. Playing a tape Recording TV programmes Before you start... • Refer to “Index to parts and controls” for button locations. Turn on your TV and set it to the video channel. To record from a decoder, turn it on. If no picture or sound is reproduced on the TV, press t TV/VIDEO on the remote commander to display VIDEO indicator on the display window. Insert a tape with its safety tab in place. • PROG • To record a normal channel, press PROG +/– until the programme position number or station name you want appears in the display window. Basic Operations INPUT SELECT • To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT until the connected line appears in the display window. Press SP/LP to select the tape speed, SP or LP*....
Otros modelos de este manual:VCR / vídeo - SLV-SE240D (811.81 kb)
VCR / vídeo - SLV-SE640D (811.79 kb)
VCR / vídeo - SLV-SE640E (811.79 kb)
VCR / vídeo - SLV-SE740D (811.79 kb)