Votos - 1, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SE840N (943.55 kb)
VCR / vídeo - SLV-SE840N (929.9 kb)
VCR / vídeo - SLV-SE840N (928.21 kb)
Resumen del manual
Playback starts automatically. 2 Press H (play). The TV turns on and switches to the video channel automatically. Playback starts. Tip • When there already is a tape in the VCR, press ?/1 to turn on the VCR first. When you press H (play), the TV turns on, the TV is set to the video channel, and playback starts automatically in one sequence. Note • When you use the One Touch Play function, leave the TV on or in the standby mode. Basic Operations Playing a tape Recording TV programmes Before you start... • Refer to “Index to parts and controls” for button locations. Turn on your TV and set it to the video channel. 1 To record from a decoder, turn it on. If no picture or sound is reproduced on the TV, press t TV/VIDEO on the remote commander to display VIDEO indicator on the display window. Insert a tape with its safety tab in place. 2 3 3 • PROG • To record a normal channel, press PROG +/– until the programme position number or station name you want appears in the display window. INPUT SELECT • To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT until the connected line appears in the display window. SP / LP Press SP/LP to select the tape speed, SP or LP. 4 LP (Long Play) provides recording time twice as long as SP. However, SP (Standard Play) produces better picture and audio quality. Recording TV programmes REC Press z REC to start recording. The recording indicator lights up in the display window. SE840N, SE740N, SX740N Recording indicator SE640N, SE440K Recording indicator To stop recording Press x (stop). To check the remaining time Press DISPLAY twice. With the display on, press COUNTER/REMAIN to check the remaining time. Each time you press COUNTER/REMAIN, the time counter and the remaining time appear alternately. Basic Operations 61: 4 REMAIN Remaining time Time counter In order to get an accurate remaining time indication, be sure TAPE SELECT in the USER SET menu is set according to the tape type you use (see page 72). To watch another TV programme while recording 1 Press t TV/VIDEO to turn off the VIDEO indicator in the display window. 2 Select another programme position on the TV. continued Recording TV programmes To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the same tape again, cover the tab hole with adhesive tape. Safety tab Tips • To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press -/-- (ten’s digit) followed by the programme number buttons. • If you connect additional equipment to a LINE connector or jack, you can select the input signal using the INPUT SELECT or PROG +/– buttons. • The DISPLAY information appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. • If you do not want to watch TV while recording, you can turn off the TV. When using a decoder, make sure to leave it on. Notes • The DISPLAY information does not appear during still (pause) mode or slow- motion playback. • If a tape has portions recorded in both PAL (MESECAM) and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems. • You cannot watch a Canal Plus programme while recording another Canal Plus programme. • When you insert a non-standard commercially available tape, the remaining time may not be correct. • The remaining time is intended for rough measurement only. • About 30 seconds after the tape begins playback, the tape remaining time will be displayed. Recording TV programmes Recording what you are watching on the TV (TV Direct Rec) (not available on SLV-SE640N and SE440K) If you use the SMARTLINK connection, you can easily record what you are watching on the TV (other than tapes being played on the VCR). 1 Press ?/1 to turn on the VCR. 2 Insert a tape with its safety tab in place. 3 Press z REC while you are watching a TV programme or external source. The TV indicator lights up and the VCR starts recording what you are watching on the TV. Tip • The TV indicator appears in the display window after you press z REC in some situations such as: – when you are watching a source connected to the TV’s line input, or – when the TV tuner preset data for the programme position is different from the data in the VCR tuner preset. Notes • You cannot record what you are watching using this method when the VCR is in the following modes; pause, timer standby, tuner preset, Auto Set Up, and recording. • When the TV indicator is lit in the display window, do not turn off the TV nor change the TV programme position. When the TV indicator is not lit, the VCR continues recording the programme even if you change the TV programme position on the TV. • To use the TV Direct Rec function, select SMARTLINK in the INSTALLATION menu, then set TV DIRECT RECORD to ON. Basic Operations Recording TV pro...
Otros modelos de este manual:VCR / vídeo - SLV-SE440K (818.53 kb)
VCR / vídeo - SLV-SE640N (818.51 kb)
VCR / vídeo - SLV-SE740N (818.51 kb)
VCR / vídeo - SLV-SX740N (818.51 kb)