Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Refer to the examples A through C and choose the connection that best suits your VCR. Example A Your VCR (Recorder) TV i LINE-1 (TV) VMC-2121HG Scart cable (not supplied) Scart (EURO-AV) Other VCR (Player) : Signal flow Example B Your VCR (Recorder) TV VMC-820HG audio/video cable (not supplied) LINE OUT Other VCR (Player) : Signal flow LINE-2 IN*1 (open cover to connect) Connecting to a VCR or stereo system Example C Your VCR (Recorder) TV DECODER/ t LINE-3 IN*1 or DECODER/ t LINE-2 IN*2 Scart (EURO-AV) Other VCR (Player) VMC-2121HG Scart cable (not supplied) : Signal flow How to connect to a stereo system (SLV-SE800D1/D2/E and SX800D only) Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output jacks on the stereo system, using the RK-C510HG audio cable (not supplied). Notes • Make sure you connect the plugs to jacks of the same colour.*1 • If the other VCR is a monaural type, leave the red plugs unconnected. • If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise. • If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable instead and connect the cable to the line out jacks of the other VCR. • When you connect another VCR to the DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector, set DECODER/LINE3*1 (or DECODER/LINE2*2) to LINE3*1 (or LINE2*2) in the OPTIONS-2 menu. *1 SLV-SE800D1/D2/E and SX800D only *2 SLV-SE600E, SX600E, SE650D, SE700D1/D2/E1/E2, and SX700D/E only Editing Connecting to a VCR or stereo system Basic editing (when recording on this VCR) Before you start editing • Turn on your TV and set it to the video channel. • Press INPUT SELECT to display the connected line in the display window. • Press SP/LP to select the tape speed, SP or LP. XzREC • On this VCR, set EDIT to ON in the OPTIONS-1 menu. If the other VCR has a similar function, turn it on as well. 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause). 3 Press z REC on this VCR to set it to recording pause. 4 To start editing, press the X (pause) buttons on both VCRs at the same time. To stop editing Press the x STOP buttons on both VCRs. Tip • To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording. Note • If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z REC again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled. Basic editing Audio dubbing (SLV-SE800D1/D2/E and SX800D only) Editing This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder. Before you start • Open the LINE-2 IN AUDIO L/R jacks cover on the front panel and connect a playback source. • Turn on the TV and set it to the video channel. AUDIO DUB XLINE-2 IN 1 2 3 4 5 6 7 8 9 0 CLEAR 1 Insert a source tape into your stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause. 2 Insert a prerecorded tape with its safety tab in place into this (recording) VCR. Search for the start of the section to be replaced and press X (pause). The VCR enters pause mode. 3 Press AUDIO DUB. The programme position changes to “L2,” and the indicator appears in the display window. Audio dubbing (SLV-SE800D1/D2/E and SX800D only) 4 To start editing, press the X (pause) buttons on this VCR and the stereo system (or other VCR) at the same time. After you use this feature, the audio in playback mode is automatically set to monaural. To stop editing Press x STOP on this VCR and the stereo system (or other VCR). To listen to both the hi-fi and normal audio Set AUDIO MIX to ON in the OPTIONS-1 menu (page 78). Use this feature to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is set to ON, the AUDIO MONITOR button does not function. Remember to reset AUDIO MIX to OFF after playing the tape. Note • If you eject the tape or turn the VCR off, AUDIO MIX is automatically set to OFF. Audio dubbing (SLV-SE800D1/D2/E and SX800D only) Additional Information Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony service facility. Symptom Remedy Power The ?/1 ON/STANDBY switch does not function. • Connect the mains lead to the mains securely. The power is turned on but the VCR does...
Otros modelos de este manual:VCR / vídeo - SLV-SE600A (1.13 mb)
VCR / vídeo - SLV-SE600E (1.13 mb)
VCR / vídeo - SLV-SE650D (1.13 mb)
VCR / vídeo - SLV-SE700D1 (1.13 mb)