This booklet contains the information necessary for using & maintaining your remote start system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880. OPERATION CAUTIONS & WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all assoc
1) If engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start". 2) If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY TURNING OFF A REMOTE STARTED ENGINE: 1) Engine is running in Remote Start (Parking lights are ON). 2) Press the Remote Start button again or for RS801 model, activate Green Start input wire. 3) Engine turns & parking lights OFF, Doors remain locked or will re-lock/re
OF PIXELS H 510 5СЮ V 492 582 SCANNING FREQUENCY H 15.734”Khz Í5Í625 Khz V 59.94 Hz 50 Hz HORIZONTAL RESOLUTION 380 TV Lines 380 TV Lines SHUTTER SPEED 1/60-1/100,000 see 1/50-1/100,000 see IMAGE PICK-UP DEVICE 1/4" IT COLOR CCD Image Sensor SCANNING SYSTEM 2:1 Interlaced SYNC. SYSTEM Internal S/N RATIO (AGC off) More than 48 dB MIN. SENSITIVITY 0.5 [ux -at F: 2.0/30 IRE GAMMA CORRECTION 0.45 Approx GAIN CONTROL Automatic VIDEO OUTPUT Composite Video 1.0Vp-p/750hm
This device may not cause harmful interference. 2. This device must accept any interference, including interference that may cause undesired operation. INTRODUCTION The WR-3000 receiver can be used with any of the Dakota Alert 3000 series transmitters ( WMT-3000, WPT- 3000, WHT-3000) . The WR-3000 plugs in to a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter one of 4 different tones (Classical , Westminster Chime, Din
z Please make sure the vehicle is well parked in a safe place. Make sure that the engine and the power are switched off. z Avoid installation outdoors during rain or thunder storms. z The instructions presented in this manual are based on the passenger seat at the right of the driver’s seat. In an opposite situation, change the directions accordingly. z Objects on the monitor are closer than they appear. • This I/R camera is not a safety device. Safe driving is the driver’s responsibility in all
4. When you get to the desired option number, quickly press the appropriate button on the remote control according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2 chirps/flashes for button 2, 3 for Button #3 and 4 for button #4. (See Chart below for option descriptions and values.) 5. Turn Ignition off. System chirps and flashes the lights 3 times on exit. When you are finished customizing options, check operation. PROGRAMMING OPTIONS CHART * = Default
If the system is armed, pressing Button 4 may or may not trip the alarm system when opening the trunk depending on programming option #7. See page 8. 12 OPERATING INSTRUCTIONS EMERGENCY OVERRIDE & DISARM If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to perform and Emergency Override to Disarm the Alarm. Open the door with the key, (alarm will sound). Turn the ignition on and press the override/program button 4-5 seconds (until siren sto
If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support number below. *IMPORTANT INFORMATION: This system does not improve or affect the range of the factory remote keyless entry transmitters. This is an ADD-ON system only. The arm/disarm range of this system will be identical to that of the Factory Keyless System’s lock/unlock range. This installation book is designed for the installer or individual with an existing understanding of au